AnswerID: 186870 Submitted: Thursday, Aug 03, 2006 at 09:15
Member - Craig D (SA)
replied:
This is what I have been using for the past two years and I find it terrific for the following reasons:
1. Shows main starting battery and auxiallary votage levels at the same time.
2. Both main and auxiallary are alarmed for low voltage (eg: alt failure or aux not charging)
3. Is temperature compensated for more accurate voltage readings.
4. Shows charge state in both percentage and voltage with coloured scales.
5. Both displays can have their alarms turned off and either or both displays turned off.
The unit is far from cheap - about $140 - but as I said it works for me. I also find it handy in that I know exactly when the main batt is charged and the Redarc Smart Start switches in to the auxillaries, as the leds light up and there is an audible beep. As my auxillaries are in a camper, I can monitor the charging state from the cab whilst driving to give me a warm, fuzzy feeling that all is well in the charging department.
Regards,
 Click Image to Enlarge |
| Craig D |
Reply 3 of 5