HI-701 4in1 Bluetooth GPS Enabled Car Holder 

The Bluetooth variation of the HI-701 4 in 1 car holder is a complete PDA car holder solution. The unit will allow users to charge their PDA, amplify the sound of the PDA along with providing GPS capabilities. Being a Bluetooth unit, the PDA can still be used as a GPS when not in the cradle (range varies).

Almost any type of PDA can be used with the Bluetooth 4 in 1 car holder.

Note: You will be promoted to enter your PDA make/model during the order process.

Standard Accessories  See Image
1. HI-701 BT 4 in 1 car holder
2. PDA base connector (one type)
3. DC 12V Cigarette lighter power cable (compatible with DC12V to DC24V supplies)
4. Hinged Bluetooth® GPS receiver back card
5. Audio cable
6. Suction cup car mount

GPS Receiver Specification
Chipset	SiRF Star III
Interfaces	PCB golden finger & Mini-1394
Protocol	NMEA0183 GGA, GSA, GSV, RMC, GLL
Baud Rate	4800, N, 8, 1
Max. Update Rate	1 Hz
Datum	WGS84
Channel	20 channel
Frequency	L1, 1575.42MHz
Hot Start	8 sec. Average
Warm Start	38 sec. Average
Cold Start	48 sec. Average
Reacquisition Tike	100 ms
Position Accuracy	15m 2D RMS, SA off
Macimum Altitude	18,000m
Maximum velocity	515m/s
Voltage	DC 3.3V+-10%
Power consumption	90mA continuous mode
Antenna Type	Built-in active antenna
External Antenna Connector	MMCX (Optional)
Dimension	Fold: 79 (L) x 60 (W) x 26 (H)mm Unfold: 132 (L) x 60 (W) x 26 (H)mm
LED Indicator:	3D Positioning (blinking) or Searching GPS (on)

Bluetooth® Specifications: Bluetooth® V1.1 Compliances
Frequency Range:	2.4 ~ 2.4835 GHz unlicensed ISM band
Interfaces	USB/UART/SPI
Receiver Sensetivity:	-80 dBm @ 0.1% BER
Transmitting Power:	Class 2 -6 dBm ~ +4 dBm
RF Input Impedance:	50 ohms
Frequency hopping:	1600hops/sec.
Baseband Crystal OSC:	16MHz
Data Rate:	Up to 723Kb/s
Operating Temperature:	-20C ~ +80C
Storage Temperature:	-30C ~ +90C
Transmitting Range:	10 meters (Typical)
Power Consumption:	65 mA (Typical)

If you wish to send this to a friend please Register or Logon now.