Site Search
Print Page Setup Profile Login
Section Image

hayes lemmerz controller problem?

Submitted: Thursday, Jun 02, 2005 at 01:18

Nige

Hi folks - has anyone had their brake lights mysteriously come on and stay on until the fuse is removed from the brake controller power supply circuit? We have a fairly new Endeavour model in our 80 series and the led code says OC (open circuit), but I would have expected the fuse to blow if there was a real short somewhere. I haven't checked it all properly yet but was wondering if this was a symptom of a problem someone else has seen before. Thanks, Nige.
ThreadID: 23518 Replies: 3
Views: 611 FollowUps: None
This Thread has been Archived
Thread Summary
Thread Watch Back To Forum Alert Moderator FAQ
AnswerID: 114033   Submitted: Thursday, Jun 02, 2005 at 06:33

Rexton replied:

Nige, Had problem in Jeep brake light comming on at any time while vehicle was sitting in the drive, lights only stayed on for a few min or flashed : problem was in the switch fixed under warranty
Reply 1 of 3
AnswerID: 114047   Submitted: Thursday, Jun 02, 2005 at 08:16

traveller2 replied:

A friend with an F250 had the same problem
Reply 2 of 3
AnswerID: 114103   Submitted: Thursday, Jun 02, 2005 at 17:03

Shaker replied:

I have had the same problem, but with a Tekonsha Voyager brake controller, I thought I was seeing things, sitting on the verandah having a quiet coffee, when the brakes lights came on for a few seconds & went off again. Noticed it again a few weeks later too.
After a bit of a battle, like threatening to go to Vicroads road safety division, I got it replaced!
Reply 3 of 3