Site Search
Print Page Setup Profile Login
You have 4 items in your shopping cart
Section Image

Brawn Winches

Submitted: Tuesday, Feb 04, 2003 at 13:46

Marty and Sam

Has anybody got a Brawn winch and if so what are they like. I am in the market for a winch and am trying to talk the other half into letting me by an electric one, at this stage she is only agreeing to a tirfor style winch because they are cheaper. I have priced up the Warn and OX winches and they came back at $1910 and $1775 but i have noticed that the Brawn winches are on special at the moment for around $1300 big difference. Also are they easy to fit, i have a winch compatible bar and i am capable of of doing it, but auto electrics are my downfall. Does anybody know if they are available in Perth and if so where.
Advertisement
ThreadID: 3222 Replies: 5
Views: 498 FollowUps: 7
This Thread has been Archived
Thread Summary
Thread Watch Back To Forum Alert Moderator FAQ
AnswerID: 12484   Submitted: Tuesday, Feb 04, 2003 at 15:19

David replied:

X9 superwinch 9000lb can be shipped ex Adelaide $1399 Freight Free as advertised in 4WD Monthly
Reply 1 of 5
AnswerID: 12486   Submitted: Tuesday, Feb 04, 2003 at 15:47

Truckster replied:

Just on the phone to Colin from Brawn then about other things.

Give him a call... :-)

Winch fitting is usually half dozen bolts, and wiring up to your battery,
+ cable and - cable put a cut out switch in the middle too worth it in the long run.!
Reply 2 of 5
AnswerID: 12499   Submitted: Tuesday, Feb 04, 2003 at 18:21

Member - Willem replied:

Yep, I just fitted a 9500lb Brawn. Had to make a special plate to boly it down as I do not have a modern winch-compatible bull bar. Electrics are simple but I do have an uncomplicated vehicle. The Brawn and the Ox Electric are the same. They are both rebadged T-Max winches with subtle differences in the electrics. Have not used it in anger yet but it souynds agressive. Ring Colin Pond on 03 9798 8522 and do a deal. The price is right. Cheers, W
Reply 3 of 5
AnswerID: 12518   Submitted: Wednesday, Feb 05, 2003 at 01:20

Marty and Sam replied:

Thanks guys now all i have to do is talk the wife around and we are in action . WISH ME LUCK!
Reply 4 of 5
FollowupID: 7317   Submitted: Wednesday, Feb 05, 2003 at 12:26

Truckster posted:

Dont tell her, just come home with it on and see how long it takes her to notice.

Note: you will need heavier front springs too.
FollowUp 1 of 2
FollowupID: 7340   Submitted: Wednesday, Feb 05, 2003 at 20:00

Mikell posted:

Thats what i did 4 weeks ago. WEnt out and bought a 2nd hand winch bar, raced home and fitted it and parked the car in the shed thinking she wont notice for a while. Then as i was carrying the alloy bar away to hide it she comes home early from work. Not happy Jan
FollowUp 2 of 2
Activities Index
Perfromance & Fun Sailing Adventure (2 days) Perfromance & Fun Sailing Adventure (2 days)
The Whitsundays - QLD
Performance sailing in comfort.
Fishing and Crabbing Adventure - Qld Fishing and Crabbing Adventure - Qld
Sunshine Coast - QLD
Fish one of Queensland's most pristine fishing areas, with over 40km of the Noosa River.
CBD Day Spa Hot Stone Massage CBD Day Spa Hot Stone Massage
Sydney - NSW
Get ready to be pampered as you experience your Sydney CBD day spa treatment that is guaranteed to r
Brock The Legend Show Spectacular Brock The Legend Show Spectacular
Rockhampton Region - QLD
Come and experience the thrill that Peter Brock lived.
Book Now - Things To Do
AnswerID: 12553   Submitted: Wednesday, Feb 05, 2003 at 14:17

Marty and Sam replied:

Allready got the front springs under controll we are getting all new springs and billstien shocks front and back what would be a good hight to lift it over standard dont want to go overboard as we use the car everyday.
Reply 5 of 5
FollowupID: 7327   Submitted: Wednesday, Feb 05, 2003 at 16:04

Voxson posted:

the front of my gq dropped by an inch after fitted an electric winch and be careful about lift kits because they can sometimes cause front end vibrations when the hubs are locked in due to new and steeper tailshaft / uni joint angles....
i have got a little vibe myself with a 4" lift........
i fitted an X9 to the front of my winch-ready bar.......
FollowUp 1 of 5
FollowupID: 7328   Submitted: Wednesday, Feb 05, 2003 at 16:05

Voxson posted:

i meant to say "TO MY WINCH-READY BAR"..
Not to the front of it.........
FollowUp 2 of 5
FollowupID: 7353   Submitted: Thursday, Feb 06, 2003 at 09:07

Truckster posted:

4inch lifts are usually ok for viabration.....

Could be time to check the unis on the tailshaft...

Is it LWB or SWB

Shorts have lots o problems with Vibs when lifted lots.
FollowUp 3 of 5
FollowupID: 7385   Submitted: Thursday, Feb 06, 2003 at 20:23

Voxson posted:

LWB... The car was purchased from an older bloke who only towed his van twice a year. It has 100k on the clock.
Maybe the prob is from not using the front shaft much?...
It was fine before the lift kit.
Then as soon as the 4" went in.. "vibrations when the front hubs locked in".
Tried a 3 degree caster kit in the front diff.... No change at all..
Tried turning the front shaft around... No change at all..
Had the uni's checked at Adelaide Tailshafts.. No probs at all..

......................I'll beef hooked...................



FollowUp 4 of 5
FollowupID: 7386   Submitted: Thursday, Feb 06, 2003 at 20:23

Voxson posted:

LWB... The car was purchased from an older bloke who only towed his van twice a year. It has 100k on the clock.
Maybe the prob is from not using the front shaft much?...
It was fine before the lift kit.
Then as soon as the 4" went in.. "vibrations when the front hubs locked in".
Tried a 3 degree caster kit in the front diff.... No change at all..
Tried turning the front shaft around... No change at all..
Had the uni's checked at Adelaide Tailshafts.. No probs at all..

......................I'll beef hooked...................



FollowUp 5 of 5