Site Search
Print Page Setup Profile Login
Section Image

Part number For front diff bearings GQ

Submitted: Wednesday, Dec 03, 2003 at 06:53

cokeaddict

Hi all,
Was wondering if anyone knows the part number for the main bearings in the front diff centre for a GQ, or if there is a place out there that i can access to find it? I am having ARB fit an air locker to my front diff next week and i'd like to replace the main bearings while they have it apart.I love it when you talk DIRTY !
Advertisement
ThreadID: 8929 Replies: 3
Views: 332 FollowUps: 4
This Thread has been Archived
Thread Summary
Thread Watch Back To Forum Alert Moderator FAQ
AnswerID: 39254   Submitted: Wednesday, Dec 03, 2003 at 07:00

Well 55 replied:

Get them to supply and fit, that way all warranty falls back on them.
Reply 1 of 3
FollowupID: 238466   Submitted: Wednesday, Dec 03, 2003 at 07:42

cokeaddict posted:

well.i figured if i supply brgs and they fit them then that would still be covered by warranty if anything was to happen, as they have to remove them anyway. And I could get them much cheaper than they would charge me for same.
I love it when you talk DIRTY !
FollowUp 1 of 2
FollowupID: 238478   Submitted: Wednesday, Dec 03, 2003 at 09:22

Big Red posted:

Parts supplied by you would not be covered by their warranty.
FollowUp 2 of 2
AnswerID: 39269   Submitted: Wednesday, Dec 03, 2003 at 09:45

Voxson (Adelaide) replied:

warranty::::::: workmanship and parts "supplied" are covered.... If you supply your own parts you will create a loophole for a warranty escape...._____________________________________________
Cant think of anything to put here just yet !
_____________________________________________
Reply 2 of 3
FollowupID: 257029   Submitted: Wednesday, Dec 03, 2003 at 14:03

cokeaddict posted:

OK then..juess ill let them do it all, cant arugue with that ayI love it when you talk DIRTY !
FollowUp 1 of 2
FollowupID: 257041   Submitted: Wednesday, Dec 03, 2003 at 15:55

Voxson (Adelaide) posted:

They will mark up the bearings of course but it wouldnt even be enough to worry about....
We actually buy in bearings at a certain price and mark them up and resell them in the job and our resell price is still 30% cheaper than most can walk in off the street and buy them for straight from the supplier....
So it may be the same case for your supplier of locker to you...

Cheers...._____________________________________________
Cant think of anything to put here just yet !
_____________________________________________
FollowUp 2 of 2
AnswerID: 39313   Submitted: Wednesday, Dec 03, 2003 at 16:36

Mickl replied:

Try BSC (Motion Technology). They do overhaul kits (pinion bearings,carrier bearings, seals, gaskets, collapsible spacer) They will also can supply all these parts individually.
Reply 3 of 3