Slide Disc
Submitted: Saturday, Jan 13, 2007 at 16:57
ThreadID:
41173
Views:
1998
Replies:
4
FollowUps:
0
This Thread has been Archived
Member - Vivienne G (QLD)
RustyHelen replied to my question on the Canning back in October 2006. He suggested a "Slide" to attach to the front of the trailer when having to scull drag it over the sand. He offered to send me a picture of it. If you are reading this I am still interested in any pictures you can forward to me. This would be a great help.
Regards
Viv
email address: vgoullet@bigpond.net.au
Reply By: Member - Doug T (W.A) - Saturday, Jan 13, 2007 at 17:19
Saturday, Jan 13, 2007 at 17:19
Hi Viv
I thought about that too when an off road trailer, don't need one now, but I was going to get something made that looked like a short water ski and have it fixed to a piece of pipe same diameter as the jockey wheel pipe ,get the picture,
well it never got any further than the old brain , Yeh I'm a gunnado.
Doug
AnswerID:
215117
Reply By: Shaker - Saturday, Jan 13, 2007 at 17:20
Saturday, Jan 13, 2007 at 17:20
You can also put a shovel under the jockey wheel & tie the handle up to the draw bar.
AnswerID:
215118
Reply By: Crackles - Saturday, Jan 13, 2007 at 17:30
Saturday, Jan 13, 2007 at 17:30
Have seen a round plough disc welded to the underside of the trailer A frame which allows it to be towed in any direction without it digging in.
Cheers Craig..........
AnswerID:
215122
Reply By: johnlyn - Saturday, Jan 13, 2007 at 17:55
Saturday, Jan 13, 2007 at 17:55
not hard to do chop the wheel off ajack down tube then weld plough disc to it its an old fix for
boat launch over beach ormud
AnswerID:
215124