Uni joints
Submitted: Monday, Apr 07, 2003 at 15:59
ThreadID:
4265
Views:
1185
Replies:
2
FollowUps:
2
This Thread has been Archived
Aaron
Hello everyone Has any Jackaroo(99 model) owners replaced their universal joints in there rear drive shaft and if so how much for each joint and the total bill??
Reply By: New Jack - Tuesday, Apr 08, 2003 at 23:42
Tuesday, Apr 08, 2003 at 23:42
Hi Aaron,
I haven't actually replaced any uni joints in my Jackaroo's, the last one I had, had over 300,000 kms on it (same uni joints) gear box & diffs. 2 motors though, the little 2 litres rev their hearts out.
How come you need to replace the uni's? they last for ages if you keep them greased. relacement is not hard, basic metric spanners & external circlip pliers easy do it yourself stuff. sorry can't help with the parts costings, try Repco or someone other than Holden. drop me an email if you need more info.
Best of luck
Mark 04/98 petrol Jack.
AnswerID:
17191
Follow Up By: Aaron - Wednesday, Apr 09, 2003 at 16:22
Wednesday, Apr 09, 2003 at 16:22
G'day Mark the dealer just put a new engine in at 90000 and replaced the uni joints telling me that they weren't good enough to put back in the vechile.They charged $296.00 for the work .
FollowupID:
10758
Reply By: Redjack - Saturday, Apr 12, 2003 at 05:45
Saturday, Apr 12, 2003 at 05:45
Aaron,
What happened to the motor?
AnswerID:
17440
Follow Up By: Aaron - Saturday, Apr 12, 2003 at 16:15
Saturday, Apr 12, 2003 at 16:15
Hello redjack it's the 3.0l turbo intercooled engine (4jx1) and it failed at 90000 . The story is in the explore oz
forum at post id 3913. there is another case in the
forum somewhere but you'll have to find it. This one leaned the fuel mixture causing overheating which cooked no. 2 cylinder I think it has something to do with the injector seals in the head failing which inturn does some nasty things.
FollowupID:
10951