2 inch lift

Submitted: Monday, Feb 23, 2004 at 15:30
ThreadID: 10730 Views:1230 Replies:2 FollowUps:0
This Thread has been Archived
Has anyone used a 2 inch lift kit from Marks adaptors on a 80 series. Issuse with radiator placement and bull bar height.
Back Expand Un-Read 0 Moderator

Reply By: Leroy - Monday, Feb 23, 2004 at 15:52

Monday, Feb 23, 2004 at 15:52
You're obvioulsy talking body lift?

Leroy
AnswerID: 47731

Reply By: Coops (Pilbara) - Monday, Feb 23, 2004 at 17:11

Monday, Feb 23, 2004 at 17:11
did my own 50mm lift.
Requires custom shroud or lowering of radiator. Also requires complete disassembly of radiator, grill & indicators to gain access to front bolts. You cannot buy a bolt for front the required length and I ended up using a length of 10mm threaded rod with a nut tacked on to it. I then used the bolt removed from the front at the rear.
Marks kit I believe consists of steel blocks and I wouldn't go there.
Bull bar requires lifting also and rear bar looks disgusting as a bonus.
I would recommend a steering shaft extension (Snake Racing) and would also recommend a 40 mm lift in lieu of 50mm to avoid this and the issue with the short lever and having to remove at least one of your transmission surround boots or modifying the short lever.
My best recommendation would be to go to a 4" suspension lift instead of 2" +2 inches of bodylift.Live the life you love -
Love the life you live !!!
AnswerID: 47740

Sponsored Links

Popular Products (13)