Trailer Valet help needed please
Submitted: Saturday, Jul 18, 2015 at 10:23
ThreadID:
119526
Views:
3979
Replies:
1
FollowUps:
4
This Thread has been Archived
Sandrab58
Hi
We purchased a Trailer Valet caravan mover from Camec and there's 2 things we can't do and the instructions are no help. Can someone who has one please tell me:
1) How do you access the valve to inflate the tyres? We've rotated the tyres so the valve is visible, but it lies flat against the inner wheel and so we can't screw on the compressor end to inflate it. Do you really have to go through the rigamarole of taking the wheels off?
2) How does it lock into the stow position for travel? When its turned sideways and the locking pin inserted it hangs quite low to the road. If you turn it up so the bulk of it is above the drawbar, its very unstable. In any case, I can't for the life of me figure out where the security bolt goes anyway.
All help gratefully accepted
Reply By: vk1dx - Saturday, Jul 18, 2015 at 10:46
Saturday, Jul 18, 2015 at 10:46
This may help you with the second question:
Phil
AnswerID:
557133
Follow Up By: Member - John - Saturday, Jul 18, 2015 at 14:13
Saturday, Jul 18, 2015 at 14:13
Phil, says that playback has been disabled...........
FollowupID:
843434
Follow Up By: Member - Rod N (QLD) - Saturday, Jul 18, 2015 at 14:25
Saturday, Jul 18, 2015 at 14:25
If you click on 'Watch this video on YouTube' you can do just that.
FollowupID:
843435
Follow Up By: Nomadic Navara - Saturday, Jul 18, 2015 at 17:26
Saturday, Jul 18, 2015 at 17:26
Either watch it that way or use the "Download" button in the top RH corner of the picture and get a permanent copy of the video (just hover your cursor over the video and the button appears.)
FollowupID:
843440
Follow Up By: Member - John - Saturday, Jul 18, 2015 at 18:58
Saturday, Jul 18, 2015 at 18:58
Learn something new every day......................
FollowupID:
843443