Prado 90 Fridge slide/draws
Submitted: Saturday, May 29, 2004 at 12:54
ThreadID:
13269
Views:
2805
Replies:
2
FollowUps:
0
This Thread has been Archived
Tim
Hi guys,
Just wondering if anyone with a 90 series prado has made a fridge slide or a false floor for their truck and if so how did you do?
I am in the brainstorming phase at the moment but basically I want something to hold the fridge, preferably up off the floor.
Any ideas greatly appreciated.
Tim
Reply By: AK - Sunday, May 30, 2004 at 10:43
Sunday, May 30, 2004 at 10:43
Tim
I made a 3/4 false floor 70mm above the floor to accept the camping table under neath. On the false floor I attached the 40waeco fridge( no slide yet). On the other side I bought 6 plastic drawers from Bunnings at about $15 each. I mounted them 2 wide and 3 high and encased them in a light wooden frame. The floor is secured via the 2 mounts in the middle of the cargo area and the fridge uses the other 2 tie down points. The way this sytem works is when I get to a
camp site I can fully remove the drawer system which I only store food and cooking gear, this means I don't have to keep going to the car when cooking.
PS I don't keep the false floor in when not camping.
Cheers
AnswerID:
60860
Reply By: 90s_owner - Sunday, May 30, 2004 at 15:05
Sunday, May 30, 2004 at 15:05
Tim,
Have some info and pics of how we did ours - can email if you leave an address.
Also tried to answer your question on running fridge wire thruogh the chassis but the site wouldn't let me reply?
Glenn B.
AnswerID:
60874