OziExplorer File Converter Wanted
Submitted: Monday, May 03, 2021 at 20:21
ThreadID:
141676
Views:
6851
Replies:
6
FollowUps:
6
This Thread has been Archived
Gwadir
Hello all, I'm looking for a copy of a map conversion program called OziMapTrans so I can convert qct format maps to tif and eventually to OziExplorer maps. Apparently this software was around about 10 yrs ago, I've done numerous Google searches but have had no luck, would anybody out there have a copy they could share with me please. Thanks
Reply By: Frank P (NSW) - Monday, May 03, 2021 at 22:26
Monday, May 03, 2021 at 22:26
Third reply down
on this page.
You will have to register.
The
forum is still active but I have no idea if the download is still available.
AnswerID:
636235
Follow Up By: Member - Duncan2H - Tuesday, May 04, 2021 at 08:47
Tuesday, May 04, 2021 at 08:47
I am registered on that site, the link is dead alas.
FollowupID:
914106
Follow Up By: Gwadir - Tuesday, May 04, 2021 at 14:46
Tuesday, May 04, 2021 at 14:46
Thanks for that Duncan, much appreciated.
FollowupID:
914108
Reply By: Member - Racey - Tuesday, May 04, 2021 at 09:24
Tuesday, May 04, 2021 at 09:24
There is a file convertor on the OziExplorer web site
Oziexplorer underUTILITIES.
AnswerID:
636239
Reply By: SCUBADOO - Tuesday, May 04, 2021 at 14:33
Tuesday, May 04, 2021 at 14:33
My copy of the last known version here for a few days:
https://www.mediafire.com/file/3359peejsx9dore/OziMapTrans_1.3.0.9.zip/file
AnswerID:
636240
Follow Up By: Gwadir - Tuesday, May 04, 2021 at 14:45
Tuesday, May 04, 2021 at 14:45
Thanks for that SCUBADOO, I've downloaded and opened the file, unfortunately my german is non-existent, any ideas on a translation?
FollowupID:
914107
Follow Up By: Gwadir - Tuesday, May 04, 2021 at 20:00
Tuesday, May 04, 2021 at 20:00
Thanks for that SCUBADOO,
FollowupID:
914110
Reply By: Member - Duncan2H - Tuesday, May 04, 2021 at 14:56
Tuesday, May 04, 2021 at 14:56
Open up the OziMapTrans.ini file AFTER you have run the application the first time.. then find the line that says "Language=" and change it to "Language=English", save the file then restart the application. Worked on my PC.
AnswerID:
636241
Reply By: Member - Duncan2H - Tuesday, May 04, 2021 at 14:58
Reply By: Gwadir - Wednesday, May 05, 2021 at 18:58
Wednesday, May 05, 2021 at 18:58
Thanks everyone for your assistance, I now have a working copy of the software and have managed to convert it to English so all good, thanks once again.
AnswerID:
636260