East Coast Bullbar
Submitted: Sunday, Aug 27, 2023 at 13:19
ThreadID:
146156
Views:
2549
Replies:
5
FollowUps:
2
This Thread has been Archived
Member - David K98
Hello, I am looking to install an East Coast Bullbar "Big Tube Bullbar" to my 2021 Prado Gxl.
Don`t want steel as they are too heavy.
Does anyone have any knowledge on how good are and how they perform?
- in general use over time on a touring vehicle?
- how do they stand up in the case of an animal strike?
Thanks, David
Reply By: Nomadic Navara - Sunday, Aug 27, 2023 at 15:22
Sunday, Aug 27, 2023 at 15:22
"Don`t want steel as they are too heavy.
Does anyone have any knowledge on how good are and how they perform?
- how do they stand up in the case of an animal strike?"
In general, steel is the only way to go if you want metal models to stand animal strikes. If you want a light eight model then consider a
SmartBar.
AnswerID:
644340
Reply By: Member - Suitcase (QLD) - Sunday, Aug 27, 2023 at 20:27
Sunday, Aug 27, 2023 at 20:27
I've got an ECB Big Tube bar on a 2013 Prado. Seems fine but ...
I've had two altercations with kangaroos but neither of them hit the bull bar.
What kind of animal strike are you considering - wombat, pig, cow, roo, buffalo? Too many variables.
cheers, Kevin
AnswerID:
644342
Reply By: gke - Monday, Aug 28, 2023 at 09:40
Monday, Aug 28, 2023 at 09:40
Hi David,
I have anECB on my 09 Prado 120 and have been very happy with it.
It has a product number BT38SYP sticker on it.
One thing-
check how long delivery time is expected.
I know of someone waiting months for a 120 one with the reason given of production delays.Yours may be different.
Safe travels,
Graham.
AnswerID:
644345
Follow Up By: Richard M29 - Monday, Aug 28, 2023 at 12:53
Monday, Aug 28, 2023 at 12:53
I have always had ECB bars from QLD, for the last 22 years except for this car as they wanted $2400 for it fitted, decided to go without, and not do night driving. In my last car a Pathfinder I had 2, the wife hit a tree at 67km and destroyed the bar, but it saved the front of the car and the chassis, was not bent. I also hit a 6 foot roo, on the right side at 80km, and it was only slightly bent. Because of regulations with Suzuki's you cant have steel bars, so my current car, would normally only have an alum, or plastic. Ihave had 3 previous Suzuki's with ECB's and very happy with them.
FollowupID:
924411
Reply By: qldcamper - Tuesday, Aug 29, 2023 at 03:35
Tuesday, Aug 29, 2023 at 03:35
Only problems I've had with
mine are the fog lights are crap and the indicator/park lights filled with condensation twice but were replaced foc. They have an upgraded them and had no problem since fitting the new type.
I did need to paint the back of it with flat black to stop headlight reflection.
But solid as a
rock.
AnswerID:
644351
Reply By: Member - David K98 - Wednesday, Aug 30, 2023 at 10:50
Wednesday, Aug 30, 2023 at 10:50
Big thanks to all those that have replied to my question. Your experience and opinions are much appreciated.
Although they’re not as strong as steel, after reading everyone’s comments and 1st hand experience I reckon an E.C.B. bulbar will provide me with the balance between weight saving and last line of defence protection I am looking for.
Thanks once again,
David.
AnswerID:
644357
Follow Up By: qldcamper - Thursday, Aug 31, 2023 at 08:36
Thursday, Aug 31, 2023 at 08:36
I consider an ally bars main function is to keep the car drivable albeit with front panel damage, as long as the radiator remains intact.
FollowupID:
924431