codan hf radio
Submitted: Saturday, Jul 24, 2004 at 13:35
ThreadID:
14963
Views:
5263
Replies:
8
FollowUps:
1
This Thread has been Archived
GOB & denny vic member
goodday all
just had my
hf radio fitted but bioss was away and
young bloke didnt know much about codan my radio is a 8525 model with remote head does any body know how to bring up your own selcall on the unit the instructions dont tell you this bit
i might have to ring codan and get a better instruction book
steve
vks 737 victor 238
Reply By: Bilbo - Saturday, Jul 24, 2004 at 15:46
Saturday, Jul 24, 2004 at 15:46
If it's an 8525, you first need to find out which channel on the radio is which channel on the ether. e.g. channel number 38 on my CODAN 8525 is RFDS Kalgoorlie, which is frequency 5360 kHz .
Discovering which radio channel is which frequency can only be done by plugging the radio into a programme reader and obtaining a print out of the each channel and it's programmed frequency. I THINK that will show you which channel is SELCALL. A CODAN dealer can do this for you. Takes about 5 minutes and sometimes no charge.
CODAN 8525 are not crystal set frequencies. They are computer chip generated frequencies. Hence, the term "synthisised frequency".
Bilbo
AnswerID:
69411