Road Condition Info Please?

Submitted: Wednesday, Mar 16, 2005 at 10:34
ThreadID: 21259 Views:1685 Replies:3 FollowUps:2
This Thread has been Archived
Hi All,
Just a wee ?
Anyone know of the general condition of a road that runs in between Windorah and Longreach.

Any info would be apreciated.

Thought we might go across to Charlevile and through Windorah up to Longreach to miss some of the Highways and hope to find some quiet camp spots along the way.

Cheers

only 15days to go....................................
Back Expand Un-Read 0 Moderator

Reply By: Well 55 - Wednesday, Mar 16, 2005 at 10:43

Wednesday, Mar 16, 2005 at 10:43
Good camp sites on the west bank of the Thompson river at Jundah. The road out through Quilpie is fine, but first go into Windorah to check on conditions up to Longreach. Normally a good run.

It must be getting hard to sleep with only 15 days left till you hit the road.
AnswerID: 102639

Follow Up By: Member - Craig M (NSW) - Wednesday, Mar 16, 2005 at 11:28

Wednesday, Mar 16, 2005 at 11:28
Hi,
Thanks for the info.
On the banks of the river sounds perfect.

Its getting very hard to sleep. Especially after having to postpone for so long due to technical probs.

Cheers
0
FollowupID: 360323

Reply By: Peter Guy - Wednesday, Mar 16, 2005 at 19:19

Wednesday, Mar 16, 2005 at 19:19
We drove into Windorah from Birdsville a few years ago in December and found quite a few water crossings just out of Windorah on the Longreach Road. This road was very good but due to recent rain the water crossings were quite deep. We got through OK in the Patrol.
AnswerID: 102688

Reply By: Tripp'n Around - Wednesday, Mar 16, 2005 at 20:25

Wednesday, Mar 16, 2005 at 20:25
Hi Craig

www.racq.com.au or a quick look on here may help.

Cya
Tripp'n
:)
AnswerID: 102698

Follow Up By: Member - Craig M (NSW) - Thursday, Mar 17, 2005 at 10:43

Thursday, Mar 17, 2005 at 10:43
Hi,
Thanks for the Info.
The RACQ site is good for road closures etc.
I am after info on the general overall condition of the road. Like is my van going to fall to bits from thousands of corrugations or am i going to get heaps of punctures due to rocky surfaces etc.
Better to be safe than sorry.

Cheers
0
FollowupID: 360428

Sponsored Links