That Missn Nissan
Submitted: Tuesday, Mar 22, 2005 at 12:24
ThreadID:
21425
Views:
1965
Replies:
1
FollowUps:
5
This Thread has been Archived
Hano
Hello all,
A couple of months back i posted about a miss in the old girl, and thankyou all for you suggestions. i have worked through a couple of scenarios and it turns out the rotor button needed to be replaced... hoo bloody ray!!
Now with all the other bits i have done it goes like a shower of the proverbial....
See you on a track somewhere!
Cheers,
Hano
Reply By: GOB & denny vic member - Tuesday, Mar 22, 2005 at 16:25
Tuesday, Mar 22, 2005 at 16:25
dont just replace the rotor button make sure you get the extented version it closes the air gap the spaerk has to jumpand doesnt break down under load
steve
ps i must have missed your post as this is normally the 1st advice i give to people with a gq petrol as i had so much frustraion with
mine
steve
AnswerID:
103446
Follow Up By: Hano - Tuesday, Mar 22, 2005 at 16:31
Tuesday, Mar 22, 2005 at 16:31
i asked around in WA but nobody had heard of it. i am thinking about putting pointless ignition in, and maybe i will have found a new longer rotor by then...
talk about frustrating.....
Hano.
FollowupID:
360986
Follow Up By: GOB & denny vic member - Tuesday, Mar 22, 2005 at 20:04
Tuesday, Mar 22, 2005 at 20:04
goodday hano
lpgas1 03 97353559 in melb (
lilydale) ring them give them a visa ? no and they will send 1 to you
ps i dont work for them i know they have them thru a bloke at work
steve
FollowupID:
361005
Follow Up By: Hano - Wednesday, Mar 23, 2005 at 12:23
Wednesday, Mar 23, 2005 at 12:23
thanks mate. any comment on the pointless ignition?
FollowupID:
361086
Follow Up By: GOB & denny vic member - Thursday, Mar 24, 2005 at 06:01
Thursday, Mar 24, 2005 at 06:01
goodday hano
that would have been our next move but at $50 against a grand i took the cheap way out and it seemed to cure the problem
steve
FollowupID:
361195
Follow Up By: Hano - Thursday, Mar 24, 2005 at 12:00
Thursday, Mar 24, 2005 at 12:00
Hi Steve,
Clearly I haven’t done any research into them yet becoz a ‘g’ would have stopped me in my tracks!
I cant believe the amount of things I went through to finally fix it. but yes i will get a longer one from lpg1.
cheers and thanks for the info....
Hano
FollowupID:
361230