2.8 to 3.0
Submitted: Sunday, Apr 10, 2005 at 10:34
ThreadID:
21918
Views:
1700
Replies:
6
FollowUps:
1
This Thread has been Archived
Garyjs
Hello out there looking fo some info please, can you fit a 5L engine into a hilux in place
of the old 3L and would you have to change the gearbox and or the diff ratios any info
would be handy.
Thanks Gary.
Reply By: gqpat - Sunday, Apr 10, 2005 at 13:38
Sunday, Apr 10, 2005 at 13:38
I'm pretty sure marks 4wd adaptors have kits for these ,I not to sure about the hilux diffs though maybe a bit weak hear lots about people breaking them with v8s etc not so much power that kills them but the torque especially in low range ...
AnswerID:
105994
Reply By: Truckster (Vic) - Sunday, Apr 10, 2005 at 16:16
Sunday, Apr 10, 2005 at 16:16
yes and yes.
AnswerID:
106006
Reply By: desert - Sunday, Apr 10, 2005 at 20:54
Sunday, Apr 10, 2005 at 20:54
I assume that by 5L you are referring to the Toyota engine prefix and not 5 litre V8?
AnswerID:
106043
Reply By: Garyjs - Sunday, Apr 10, 2005 at 22:09
Sunday, Apr 10, 2005 at 22:09
DURRRRRRRRRRRRRRR!
AnswerID:
106055
Follow Up By: Wizard1 - Thursday, Apr 14, 2005 at 12:47
Thursday, Apr 14, 2005 at 12:47
Garyjs,
I think Desert asked a valid question, I was also under the assumption you intended to replace a 3 litre engine with a 5 litre V8. I noticed GQPAT made the same mistake.
Don't assume all forumites are aware of what you are talking about or perhaps word your question so that everyone is aware of what you are talking about.
FollowupID:
363678
Reply By: muzzgit (WA) - Monday, Apr 11, 2005 at 00:50
Monday, Apr 11, 2005 at 00:50
If your talking just 2.8 out and 3.0 in, then diffs should not need to change.
AnswerID:
106079
Reply By: Garyjs - Monday, Apr 11, 2005 at 09:05
Monday, Apr 11, 2005 at 09:05
Thanks
AnswerID:
106106