GQ power windows
Submitted: Saturday, May 14, 2005 at 18:39
ThreadID:
22981
Views:
1115
Replies:
1
FollowUps:
2
This Thread has been Archived
brumac
My drivers door power window motor does not stop spinning when window reaches the top.Only happens on auto wind up.Has any one had this problem before.
Reply By: Truckster (Vic) - Saturday, May 14, 2005 at 20:00
Saturday, May 14, 2005 at 20:00
Does it go up without hesitation? Theres a plastic gear inside that craps itself regularly.
AnswerID:
111284
Follow Up By: sevo - Saturday, May 14, 2005 at 22:03
Saturday, May 14, 2005 at 22:03
truckster is spot on happens frequently, plastic gear stips and causes window to fail.
FollowupID:
367665
Follow Up By: jendav - Monday, May 16, 2005 at 11:31
Monday, May 16, 2005 at 11:31
Had the same problem with my Ti, and tried many things, what fixed it was to remove the assembly completly and cut a thin piece of plastic sheet, around .25-.05mm to act as a packer under the mechanism. what happens is that the metal tabs on the winder part create a rounded edge on the plastic part, therefore it doesnt grip but slides out an keeps going round and round. By installing a lifting packer, it makes the metal tabs grip in the holes again.
sorry if this is a bit vague, going from memory.
Dave
FollowupID:
367769