Hayman Reese Electric Brake Unit
Submitted: Tuesday, Nov 26, 2002 at 01:00
ThreadID:
2464
Views:
6386
Replies:
2
FollowUps:
0
This Thread has been Archived
Grey Ghost
Gidday mates - recently I bought a 2nd hand HR unit, part no 5300. I nowwant to fit this to my commode but don't have the instructions etc. I do have an instructional manual from a Tekonsha that was fitted to a previous vehicle.
Does anyone know if it is a similar wiring layout?
or even better,
where can I get another manual online??
Or, is there a local distributor in the
Newcastle (NSW) area?
thanks!
Reply By: OziExplorer - Tuesday, Nov 26, 2002 at 01:00
Tuesday, Nov 26, 2002 at 01:00
Go here:
www.haymanreese.com.au
and if there is no information, e-mail them.
The wiring on brake controllers is not standard. The White wire is Negative.
A Haymanreece brake controller is a poor substitute for a Tekonsha.
AnswerID:
9001
Reply By: OziExplorer - Tuesday, Nov 26, 2002 at 01:00
Tuesday, Nov 26, 2002 at 01:00
Go here:
www.haymanreese.com.au
and if there is no information, e-mail them.
The wiring on brake controllers is not standard. The White wire is Negative.
A Haymanreece brake controller is a poor substitute for a Tekonsha.
This may assist you:
http://www.etrailer.com/faq/brakecontrol.asp
AnswerID:
9003