Sunday, Nov 06, 2005 at 12:39
NISSAN MOTOR CO. (AUSTRALIA) PTY. LTD. ABN. 54 004 663 156
Locked Bag 1450, Dandenong South, VIC, 3164 Phone. (03) 9797 4111 Fax. (03) 9797 4400
www.nissan.com.au
The information in this bulletin should not be interpreted as a basis for claims unless so designated.
Part numbers referred to may not always be immediately available.
Always order parts from relevant parts information and not this bulletin.
First Published: 30th September 2004 Bulletin No: MA04-001
Recommended circulation
THIS INFORMATION IS CONFIDENTIAL TO NISSAN DEALERS ONLY
PRODUCT INFORMATION
Re: Revised Engine Oil Specification
Applied Model: Y61 & D22 Applied range: ZD30 Engines
Please be advised that the specification for the oil fill on the ZD30 has been revised. Engine
Oils that meet the specification listed below are the only oils that are permitted for use in the
ZD30 Engine.
Oil Specification: ACEA B3 or JASO DH-1
Nissan strongly recommend that a viscosity rating of 10W40 be used. For specific viscosity
relating to ambient temperature ranges please refer to the viscosity chart in the relevant
workshop manual.
Note: API CG-4 oils must never be used in the ZD30 engine.
To support the revision in oil specification, Nissan has developed a semi-synthetic 10W-40
engine oil that meets all the operational demands of this engine. The revision of the new oil
specification is retrospective and will apply to all ZD30 engines.
The oil will be available from Nissan Parts & Accessories in 5lt and 200lt quantities using the
following part numbers.
5lt - B3005-10W40PK
200lt - B3200-10W40PK
Authorised by:
R Bahn
Manager - Engineering Support
National Service & Engineer
ing Department
these oils meet the spec
Castrol magnatec 10w40
Shell rimula 15/40 do not use
Valvoline durablend 10w/40
Mobil synths 10w40
FollowupID:
391684