BP Solar Control Unit Manual
Submitted: Tuesday, Mar 07, 2006 at 21:24
ThreadID:
31524
Views:
7907
Replies:
3
FollowUps:
2
This Thread has been Archived
markcas
Hi to all
Ive fitted a second hand solar set up to my camper .It came with a BP control unit BPS12RA-20.If any one can tell me how to read the flashing lights from this unit it will save me replacing it.
Thanks Mark
Reply By: MartyB - Tuesday, Mar 07, 2006 at 21:39
Tuesday, Mar 07, 2006 at 21:39
The regulator display alternates between showing the regulator status & battery voltage.
For 3 seconds it shows battery voltage, the leds are flashing, 1 led is 11v, 2 led 12v etc up to 5 leds 15v.
Next 7 seconds it shows the mode.
1 led is boost, 2 leds flashing is equalise, 2 leds on is float.
If it has a Telstar background it is probably modified to bypass the equalise mode.
If you need more info give me an email adress & I will send some.
from Marty.
AnswerID:
159200
Follow Up By: markcas - Wednesday, Mar 08, 2006 at 07:24
Wednesday, Mar 08, 2006 at 07:24
Marty it is ex Telstra
any thing else you have please send
Mark
FollowupID:
413792
Reply By: MartyB - Wednesday, Mar 08, 2006 at 10:01
Wednesday, Mar 08, 2006 at 10:01
Mark,
Give me your address & I will send it tonight.
Marty.
AnswerID:
159281
Reply By: markcas - Wednesday, Mar 08, 2006 at 20:45
Wednesday, Mar 08, 2006 at 20:45
Marty it is mcastley@bigpond.net.au
AnswerID:
159385
Follow Up By: MartyB - Wednesday, Mar 08, 2006 at 22:53
Wednesday, Mar 08, 2006 at 22:53
Mark,
Email sent.
Marty.
FollowupID:
414014