IPF wiring loom.........should I keepit ?
Submitted: Wednesday, Feb 05, 2003 at 16:24
ThreadID:
3241
Views:
1982
Replies:
3
FollowUps:
0
This Thread has been Archived
IAMGQ
I've got a pair of IPF light 100W(the lowest model)from my old pajero and plan to put it on my gq. My GQ has already got driving light wiring loom setup with dodgy light (100W)but don't know the brand. From the workmanship, it should have been done by professional but it is a very simple setup with 30Amp fues, relay.... and higher campacity wire when comparing with IPF loom.
My question is should I keep the current wiring and put the IPF light on it or should I remove the old setup and put the IPF loom?
If in the future I want to upgrade my light to other model of IPF light, can i use the same wiring of my current IPF loom?
Reply By: Truckster - Wednesday, Feb 05, 2003 at 18:10
Wednesday, Feb 05, 2003 at 18:10
If it aint broke.....
Change it and see if you notice any diffrence... Remembr you could sell the IPF one being a name brand,
Home brand would end in the bin..
Home brand doesnt mean that its crap either.....
If ya end up sellin IPF one, mail me.
AnswerID:
12566
Reply By: Brian - Thursday, Feb 06, 2003 at 01:50
Thursday, Feb 06, 2003 at 01:50
Try it out!
Put a volt meter accross
the spot light, if it is around 13.5v it's fine if less then try the IPF loom.
Brian
AnswerID:
12589
Reply By: IAMGQ - Thursday, Feb 06, 2003 at 08:45
Thursday, Feb 06, 2003 at 08:45
Thanks for your feeback guys!..............
AnswerID:
12590