Trailer Wiring Guide
Submitted: Tuesday, May 23, 2006 at 09:50
ThreadID:
34168
Views:
3515
Replies:
4
FollowUps:
6
This Thread has been Archived
Member - Doug T (QLD)
Just found this guide on the Net ,handy for those who are going to repair or rewire a new Plug/Socket
Site Link
Reply By: Wayne (NSW) - Tuesday, May 23, 2006 at 10:50
Tuesday, May 23, 2006 at 10:50
Doug,
At the bottom of the page there was a note that
"No part of this article may be reproduced without permission from the author"
I assume that you have gained the permission :-)).
What is this world coming to when there is a copy right on
information that is already out there.
When I was fitting tow bars I had most of the wiring on vehicles and the plugs committed to memory. I hope I didn't need to seek permission to recall the wiring diagram.
Wayne
AnswerID:
174187
Follow Up By: Member - Doug T (QLD) - Tuesday, May 23, 2006 at 11:01
Tuesday, May 23, 2006 at 11:01
G'Day Wayne
Can you show me where i copied it . I don't think that includes or means URLs , So you can remember the wiring because it was part of your job, I posted the URL so other people could see it too and use it as a reference , If they do not want others to see it then maybe they should remove it from the internet
FollowupID:
430166
Reply By: Alloy c/t - Tuesday, May 23, 2006 at 11:02
Tuesday, May 23, 2006 at 11:02
Be kind of hard to drag the computer ect out to the garage every time I,m asked to rewire / renew a plug or socket ,so I just refer to the back of the packet that the plug or socket came in ,,LOL.
AnswerID:
174189
Reply By: Wayne (NSW) - Tuesday, May 23, 2006 at 12:02
Tuesday, May 23, 2006 at 12:02
Doug,
I was not having a go at you mate.
Just a bit of PTT.
Pre Trip Tension before the big trip.
Wayne
AnswerID:
174198
Follow Up By: Member - Doug T (QLD) - Tuesday, May 23, 2006 at 12:20
Tuesday, May 23, 2006 at 12:20
I know Wayne, on my side it's called no trip tension, I'm out of work here in Mt Isa with the Company I was working with , One of the truck drivers was being a real bas*ard and lied and one of the younger Pilots was jabbing his CB button all the way from
Brisbane and got me set up , I recorded it from my CB but ahh no we believe our employee , so i'm out and will have to relocate to maybe
Perth.But what comes around goes around with me, I don't forget easily.
Anyhow I will be still here for a 2 or 3 weeks until i move then will have to be without internet until i get setup elsewhere
Catch ya
FollowupID:
430190
Follow Up By: Johnny boy - Tuesday, May 23, 2006 at 12:20
Tuesday, May 23, 2006 at 12:20
Geez imagine if you were having a go at him !!!!
FollowupID:
430191
Follow Up By: Member - Doug T (QLD) - Tuesday, May 23, 2006 at 12:23
Tuesday, May 23, 2006 at 12:23
Johnny Boy I do things my way , it takes a long time but it gets done, I'm like the cunning old Fox
FollowupID:
430192
Follow Up By: Richard Kovac - Wednesday, May 24, 2006 at 00:25
Wednesday, May 24, 2006 at 00:25
No No No Not
Perth
FollowupID:
430429
Reply By: Member - Coyote (SA) - Tuesday, May 23, 2006 at 16:59
Tuesday, May 23, 2006 at 16:59
Surley they would have to be kidding... why would you create a webpage and put all that info and then claim they it couldn't be copied.. if you were worried about copyright then why would you post it on the WORLD WIDE web???
AnswerID:
174255
Follow Up By: Richard Kovac - Wednesday, May 24, 2006 at 00:25
Wednesday, May 24, 2006 at 00:25
Coyote
The same reason David does to our
pic. in
places HE now owns them
Richard
FollowupID:
430428