transfer box for suzuki

Submitted: Wednesday, Jul 12, 2006 at 16:30

ThreadID: 35772 Views:2110 Replies:7 FollowUps:6

This Thread has been Archived

pjp65

would anybody know where i could get access to a second hand or reco transfer box for a suzuki serria 1991 1300cc motor. Any help would be greatly appreciated. THankyou

Back Expand Un-Read 0 Moderator Share

Reply By: ZUKSCOOTERX90(QLD-MEMBER) - Wednesday, Jul 12, 2006 at 17:31

Wednesday, Jul 12, 2006 at 17:31

You could try suzusport, as i don't know of where you live they could be in you;re capital or suburb,in Brisbane they are in Springwood,a look into you're phone books or you could thre website to see if they are in you're area, www.suzisport.au.com or youcould also try a suzuki clubin you're area.

Bob.

AnswerID: 183182

Reply By: Member - Vincent A M (NSW) - Wednesday, Jul 12, 2006 at 17:45

Wednesday, Jul 12, 2006 at 17:45

Whitch state are you in i just brought a complete virtara 96 (125,000klms) for $450 (not a straight panel on it, but it drive's great) at the insurance auctions there were a few serrias they sold for a little more, i think the dearest one was $800 I brought mine for its fuel injected motor to put in my sons 94 it was the cheapest opition

AnswerID: 183189

Follow Up By: pjp65 - Wednesday, Jul 12, 2006 at 18:12

Wednesday, Jul 12, 2006 at 18:12

im in victoria.i am having trouble finding any. Will post one from interstate if i have to. thanks

FollowupID: 439718

Follow Up By: GaryInOz (Vic) - Wednesday, Jul 12, 2006 at 18:38

Wednesday, Jul 12, 2006 at 18:38

Pjp65

if you see this in time, try to get down to the meeting

Site Link

AGM/Pizza night. Plenty of information and quite possible a contact for the parts you need cheap..............

FollowupID: 439721

Reply By: Ianw - Wednesday, Jul 12, 2006 at 23:05

Wednesday, Jul 12, 2006 at 23:05

I didn't think you could break those boxes

AnswerID: 183255

Reply By: pjp65 - Thursday, Jul 13, 2006 at 16:11

Thursday, Jul 13, 2006 at 16:11

box wont engage 4wd. Thought it would be easier to replace than fix.

AnswerID: 183355

Follow Up By: dinodog- Central Coast NSW - Thursday, Jul 13, 2006 at 19:51

Thursday, Jul 13, 2006 at 19:51

pjp65, what is the reason it won't engage, i had one of these little babies, should never have sold it, was doing the same thing. found it was the rubbers at the base of the transfer lever jamming and not allowing the lever full movement to engage. take of floor plate and see if all is ok.

dinodog

FollowupID: 439976

Reply By: pjp65 - Thursday, Jul 13, 2006 at 23:27

Thursday, Jul 13, 2006 at 23:27

dinodod sounds like a similar problem. 4wd lever jams and wont engage. with a bit of fiddling it loosens but stiffens and jams again. does this sound like your problem.thanks

AnswerID: 183437

Reply By: Ianw - Friday, Jul 14, 2006 at 00:42

Friday, Jul 14, 2006 at 00:42

Place I work we had one with problems like that. Found that the plastic bearing/socket that the lever sits in had disintegrated. Pull off the rubber seal, twist the retaining ring anti clockwise and lever should come out. Should be a spring on top of the ball and a plastic socket under the ball.

Got several spare boxes at work, can possibly help if stuck

AnswerID: 183442

Follow Up By: pjp65 - Friday, Jul 14, 2006 at 16:01

Friday, Jul 14, 2006 at 16:01

Ianw
Thanks for great info will look at it.If i cant fix it would you be willing to sell a box.

FollowupID: 440107

Follow Up By: Ianw - Friday, Jul 14, 2006 at 23:11

Friday, Jul 14, 2006 at 23:11

Yeah, can probably work something out with the boss. Had a look today, got 4 spare boxes condition unknown, but have never had problems with them that I know of. We use them on the farm till the bodies fall apart then strip them and recycle the bodies into new Falcons. Part of my job is the maintenance of all farm machinery including 5 Sierras from '86 to 93 models. When I'm not fixing them I'm driving one around the paddocks so I'm fairly familiar with the little buggers. You can contact me at ianandcharmaine@westvic.com.au

FollowupID: 440186