Flashing dash light,s
Submitted: Monday, Jul 17, 2006 at 10:01
ThreadID:
35892
Views:
2192
Replies:
3
FollowUps:
4
This Thread has been Archived
Noah,s Dad
Hello, can anyone help me? I have a flashing light's on my dash which when in 4 wheel drive stays on but after a very good day at cruiser
park, i came to disengauge and the front wheel indicators started flashing?
Now it seems to be in two wheel drive and i drove 100 kms home no prob, but it still flash's.
Iv try to engauge and disenguage again and it goes in to 4x4 no prob and goes in to 2 wheel drive no prob.
What is it telling me?
It,s a 2000 Paj np model
Have i got mud in something?
Many thank's for any help.
Noah's dad
Reply By: Des Lexic - Monday, Jul 17, 2006 at 10:21
Monday, Jul 17, 2006 at 10:21
Have you tried putting the vehicle in reverse and backing up for up to 50metres to see if the light goes off.
AnswerID:
183872
Follow Up By: Noah,s Dad - Monday, Jul 17, 2006 at 16:54
Monday, Jul 17, 2006 at 16:54
Sorry i should have said i try the old backing up but nothing i try putting it in gear out of gear all the things i could think of, but thank's for your help.
FollowupID:
440563
Reply By: donks1 - Monday, Jul 17, 2006 at 11:37
Monday, Jul 17, 2006 at 11:37
there is a free wheel hub switch on front diff that tends to play up. there is also a series of switches on the transfer which can give problems.. may be best to see mitsu dealer to work out which one is causing you grief. these range from about $70.00 to $250.00
AnswerID:
183883
Follow Up By: Noah,s Dad - Monday, Jul 17, 2006 at 16:57
Monday, Jul 17, 2006 at 16:57
Ouch!!! i was hoping you would't say that, i think they did somthing to a switch 3 years ago.
FollowupID:
440564
Reply By: Member - MrBitchi (QLD) - Monday, Jul 17, 2006 at 12:32
Monday, Jul 17, 2006 at 12:32
Mate, not an uncommon problem. If it's a 2000 model it's an NM ;-)
Hop on the Pajero club's
forum and do a search. Lots of help there.
AnswerID:
183894
Follow Up By: Noah,s Dad - Monday, Jul 17, 2006 at 16:57
Monday, Jul 17, 2006 at 16:57
I'll give it a look thank's.
FollowupID:
440565
Follow Up By: Member - Nick (Kununurra) - Monday, Jul 17, 2006 at 19:39
Monday, Jul 17, 2006 at 19:39
Yeah there was a bit in 4WD monthly a couple of issues ago,something to do with the actuator(Selector light) seizing in place due to 4wd not being used much.
FollowupID:
440596