Storage Draws for GU - Weight?
Submitted: Monday, Oct 02, 2006 at 11:22
ThreadID:
38193
Views:
2811
Replies:
9
FollowUps:
29
This Thread has been Archived
Moggs
Hi All,
I am about to order a set of side by side draws for my Patrol from www.offroadsystems.com.au. They have gal draws and a waterproof ply top and draw front. The set weighs 75kgs. Not sure how this compares with other draws out there??? There is plenty of info on materials used, dimensions etc however not much on how much they weigh.
Those that have a set of draws - what sort of weight are they empty? Is 75kgs considered heavy?
Reply By: Member - Craig M (VIC) - Monday, Oct 02, 2006 at 12:00
Monday, Oct 02, 2006 at 12:00
Moggs, I had a set in my Hilux Ute (now sold) put in by Opposite Lock. Weighed 120kgs empty (3 drawers and fridge slide). Terrific set up, but heavy.
Craig.
AnswerID:
197447
Follow Up By: Moggs - Monday, Oct 02, 2006 at 12:20
Monday, Oct 02, 2006 at 12:20
This is only 2 draws at 75kgs - so seems ok taking into account that it is one draw less - although I reckon the Hilux draws would be bigger.
FollowupID:
455942
Reply By: Leroy - Monday, Oct 02, 2006 at 12:08
Monday, Oct 02, 2006 at 12:08
Tanimi were the lightest I've seen as they were made out of aluminum but they were $$$$. How much are you looking at for these?
Leroy
AnswerID:
197448
Follow Up By: Moggs - Monday, Oct 02, 2006 at 12:22
Monday, Oct 02, 2006 at 12:22
$1,500 for the long draw set (draws each 920mm L, 500mm W,185mm H), includes double runners on each draw. They do a shorter draw (750mm L) that is $1,250 in gal or $1,500 in aluminium. The shorter draw set weighs 65kgs for gal and 45kgs for aluminium.
FollowupID:
455943
Follow Up By: Leroy - Monday, Oct 02, 2006 at 12:27
Monday, Oct 02, 2006 at 12:27
i'd look at the ali draws but in the longer length. You already have a bit of weight in the rear with the step.
Leroy
FollowupID:
455945
Follow Up By: Moggs - Monday, Oct 02, 2006 at 12:50
Monday, Oct 02, 2006 at 12:50
Unfortunately I think they only do the ali draws in the shorter length.
FollowupID:
455950
Reply By: Truckster (Vic) - Monday, Oct 02, 2006 at 12:11
Monday, Oct 02, 2006 at 12:11
I wouldnt go with a unit with the fridge on top of the draws again.. way too hard for others to get into.
AnswerID:
197450
Follow Up By: Leroy - Monday, Oct 02, 2006 at 12:18
Monday, Oct 02, 2006 at 12:18
moggs is 7'3" so it shouldn't be a prob lol but yes I agree.
Leroy
FollowupID:
455940
Follow Up By: Moggs - Monday, Oct 02, 2006 at 12:19
Monday, Oct 02, 2006 at 12:19
Yeah, was worried about that - but in the end decided a milk crate will fix that for Natalie ;-) Also want the ability to have a level flat area when the fridge isn't in - so decided on the side by side setup.
FollowupID:
455941
Follow Up By: Truckster (Vic) - Monday, Oct 02, 2006 at 12:24
Monday, Oct 02, 2006 at 12:24
Im over 6 as
well and it still sucked..
Its not him, its the kids, the missus etc. as soon as you both sit down the kids will want something and it bleep in stinks up down up down etc..
I'd go this style, still have the flat surface, but much more user friendly.
FollowupID:
455944
Follow Up By: Moggs - Monday, Oct 02, 2006 at 12:48
Monday, Oct 02, 2006 at 12:48
hear what you are saying, however the dog goes away with us and needs to go in the back. He's a very large boxer and needs a bit of room to stand and slober the windows. Can't put him on the back
seat between the kids - they get coated in drool LOL.
FollowupID:
455948
Follow Up By: Moggs - Monday, Oct 02, 2006 at 12:49
Monday, Oct 02, 2006 at 12:49
oh yeah, also when
camping we will put the fridge in the camper - so access to the fridge would only be a hassel when travelling.
FollowupID:
455949
Follow Up By: Dave(NSW) - Monday, Oct 02, 2006 at 16:23
Monday, Oct 02, 2006 at 16:23
Moggs'
Check out my rig picture,Graham built these & fold down table.draws have 60lt
water tank in front.no connections just a happy customer.
Dave
FollowupID:
455970
Follow Up By: Moggs - Monday, Oct 02, 2006 at 16:55
Monday, Oct 02, 2006 at 16:55
Thanks Dave, they look great - I'd go something similar but I have to fit the dog in there as
well. Suppose I could lay him down flat on top - but I reckon he would whinge a bit ;-)
Good to hear that people are happy with Graham's work.
FollowupID:
455972
Follow Up By: brian - Monday, Oct 02, 2006 at 20:01
Monday, Oct 02, 2006 at 20:01
truckster have you seen the fridge slide setup that releases from the cargo barrier end and hinges at the rear resulting in the fridge being on approx 30 degree angle down meaning the contents are then accessable?????????? i remove rear passengers
seat and fit it there on floor level as i only need 2 seats usually.
FollowupID:
455992
Follow Up By: Truckster (Vic) - Tuesday, Oct 03, 2006 at 21:21
Tuesday, Oct 03, 2006 at 21:21
yes, you put the fridge in the camper, but you wont always have the camper...
FollowupID:
456217
Follow Up By: Moggs - Tuesday, Oct 03, 2006 at 22:06
Tuesday, Oct 03, 2006 at 22:06
True Truckster, but I'll always have the camper when the family are onboard. I agree, it is better to have it at floor level, but I need somehwere for the dog - so its eiher 1 drawer and the slide, or 2 drawers with the slide on top. Suppose I will be doing all the fridge runs LOL!
FollowupID:
456235
Follow Up By: Truckster (Vic) - Wednesday, Oct 04, 2006 at 17:22
Wednesday, Oct 04, 2006 at 17:22
Theres
mine :)
there it is with the Tables Im going to start selling.. Not really a money maker, but people at club liked em :)
FollowupID:
456372
Reply By: donk - Monday, Oct 02, 2006 at 12:27
Monday, Oct 02, 2006 at 12:27
I have a set of these drawers in my gu & i am very happy with them
Mine are 3 drawers high on the drivers side ( the bottom one is a deeper drawer with a double slide track as i have my
tools in this one) with a 40l engel on a slide on the passenger side at floor level (easy to get in to standing on the ground)
I have a centre pole tent,bbq plate,tarps & chairs on the flat top of the drawer set
I also ordered the drawers with a 60l stainless
water tank in the front of it & a cargo barrier to suit as
well as a table top that sits on the top of the lower drawer when open (very simple & handy as for meal preperation)
Off road systems did the lot as a package & were great to deal with & i have had this setup for around 18 months & have no problems at all
As far as weight goes i am not sure but i would say they would be comparable to other drawer systems & not overly heavy
Regards Don
AnswerID:
197451
Follow Up By: Moggs - Monday, Oct 02, 2006 at 12:51
Monday, Oct 02, 2006 at 12:51
Thanks Don, have also heard good reports elsewhere re: their draws. Graham seems pretty good to deal with from the contact I have had with him so far. I liked their
water tank setup - but will carry
water in the camper to try and keep the weight down in the back of the Patrol.
FollowupID:
455951
Reply By: Peter McG (Member, Melbourne) - Monday, Oct 02, 2006 at 13:08
Monday, Oct 02, 2006 at 13:08
Moggs
This is the drawer system I have. Drop over for a look if you need to. Not too heavy and no where near the weight of some. They bolted straight in and have been great. Will move them on to the next car. He will install the T bolts for a fridge slide if you need it. Make sure you get the 2 runners fitted to the drawers. They sent them down by courier.
Peter
AnswerID:
197455
Follow Up By: Moggs - Monday, Oct 02, 2006 at 14:43
Monday, Oct 02, 2006 at 14:43
Hi Peter,
Thanks for the offer - will take you up on that. Will call during the week. I take it you have the long set of draws as you removed the cargo barrier. Graham mentioned he would include the captive nuts for the fridge slide. Did you get a 1/2 cargo barrier from them as
well?
FollowupID:
455958
Follow Up By: Peter McG (Member, Melbourne) - Monday, Oct 02, 2006 at 14:52
Monday, Oct 02, 2006 at 14:52
Moggs
I had the cargo barrier installed before the drawers so
mine are the ones that fit behind the Milford. Does he now have a longer set? Col did the half barrier to fit on top of the drwaers at the back. I don't think I'd want them any longer. It leaves a bit of space behind the back
seat.
Peter
FollowupID:
455959
Follow Up By: Moggs - Monday, Oct 02, 2006 at 15:04
Monday, Oct 02, 2006 at 15:04
Peter, he does two lengths for the Patrol now.
The standard
draws are 750mm long. They end at child restraint bolts and leave about a 10mm gap to a full length Milford barrier.
They also do a long draw set with 920mm
draws - these apparantly need a half barrier installed.
Would be great to have a look at yours prior to ordering.
FollowupID:
455961
Follow Up By: Peter McG (Member, Melbourne) - Monday, Oct 02, 2006 at 15:20
Monday, Oct 02, 2006 at 15:20
OK. Just checked. I have the 750
drawers. Plenty big enough I think. We like the use of the space behind the
seat.
Peter
FollowupID:
455963
Follow Up By: Moggs - Monday, Oct 02, 2006 at 15:36
Monday, Oct 02, 2006 at 15:36
Those are the ones I was originally thinking of getting. Was just not sure if they would be too short. Does the top go past the child restraint bolt? - which is in line with the end of the side pockets under the rear windows.
I wanted the 750
draws as they are lighter by 10kgs - but not if there is a heap of wasted space you cannot get too from behind due to the barrier. Graham actually mentioned that many just cut a hole in the milford barrier mesh at the bottom to gain access to this area from behind the back seats - would probably be a good place to put the spares kit ie. hoses, belts, bearing kits, oil etc.
FollowupID:
455964
Follow Up By: Peter McG (Member, Melbourne) - Monday, Oct 02, 2006 at 15:45
Monday, Oct 02, 2006 at 15:45
You still have access to the child restraint bolts and we use the spaece for all sorts of stuff that sits neatly behind the seats. Taking some mesh out of the barrier would work fine.
Peter
FollowupID:
455965
Reply By: greydemon - Monday, Oct 02, 2006 at 17:09
Monday, Oct 02, 2006 at 17:09
I am fascinated by all this discussion about how long and how heavy your
draws are, from the size and weight I would assume that you are talking about Winter
draws not the lightweight summer versions I am moving into at this time of year.
I wouldn't have thought that
draws made out of aluminium would be very comfortable - more like a chastity belt.
Donk and PeterMcG however seem to be having a side conversation which doesn't seem to be about underwear at all but
drawers - as in chest of
drawers.
AnswerID:
197474
Follow Up By: Moggs - Monday, Oct 02, 2006 at 17:27
Monday, Oct 02, 2006 at 17:27
LOL!, yeah, well ummm. Might refer to
drawers in the future. Thanks for pointing that out. Better be careful going forward, from what I have seen previously, you have just put a pretty big target on your back LOL!
FollowupID:
455974
Follow Up By: ACDC - Monday, Oct 02, 2006 at 18:54
Monday, Oct 02, 2006 at 18:54
Moggs,
The 4wd interiors system weighs 80kg.
You may have to upgrade your
suspension..^_^..
FollowupID:
455981
Follow Up By: Member - Kingsley N (SA) - Monday, Oct 02, 2006 at 18:58
Monday, Oct 02, 2006 at 18:58
Greydemon,
I think you will find that the underwear and the furniture are spelled the same..Ladies
drawers and 4wd
drawers.
Kingo.
FollowupID:
455983
Follow Up By: Moggs - Tuesday, Oct 03, 2006 at 22:08
Tuesday, Oct 03, 2006 at 22:08
LOL ACDC. You see, I can get the
drawers as I have already upgraded the
suspension :-)
FollowupID:
456238
Follow Up By: Truckster (Vic) - Wednesday, Oct 04, 2006 at 17:24
Wednesday, Oct 04, 2006 at 17:24
you should set your car up first then go for
suspension... easiest way to do it
FollowupID:
456374
Reply By: markeaust - Monday, Oct 02, 2006 at 19:01
Monday, Oct 02, 2006 at 19:01
Black Widows are 65kg (so I'm told).
I got the full length side by side for the same reasons and the plastic crate with timber lid works fine as a step. SWMBO car access the
fridge and she's only 5' tall!
I also sold the Milford Barrier and went for the half barrier with the
drawers a little longer and there's still plenty of room behind the seat for bits and pieces.
Very happy overall, but the only thing I don't like is the inability to get at the stuff under the floor where the wheel arches are without unloading the stuff on top of the hatches. The Tanami
drawers have a little 'door flap' to access this area which would be handy.
Cheers,
Mark
AnswerID:
197486
Reply By: JR - Tuesday, Oct 03, 2006 at 09:52
Tuesday, Oct 03, 2006 at 09:52
Dept of Interior in Syd
draws are all hardwood ply and are much lighter.
Mine have done nearly 400 000 km in a work vehicle and still work OK. They are about to go into the new wagon shortly
I can lift them in and out of the vehicles myself so at most would be 40kg I reckon. That is both
draws together just missing half the top lid, other side has a slide.
Worth a look
JR
AnswerID:
197594
Reply By: Bomber2849 - Tuesday, Oct 03, 2006 at 20:50
Tuesday, Oct 03, 2006 at 20:50
I would have thought a two-drawer system would weigh about the same as the two rear seats we removed from our 100 series.
Does anyone know how much the rear seats weigh?
Peter
AnswerID:
197682
Follow Up By: Moggs - Tuesday, Oct 03, 2006 at 22:07
Tuesday, Oct 03, 2006 at 22:07
Never thought of it that way - have the two dickie seats in the garage - will weigh hem on the weekend. If I recall rightly, they were pretty heavy!
FollowupID:
456237
Follow Up By: Truckster (Vic) - Wednesday, Oct 04, 2006 at 17:23
Wednesday, Oct 04, 2006 at 17:23
they aint light moggy! mine are 2 ft behind me here...
plus removing belts, and other crap..
FollowupID:
456373