100 series Landcruiser
Submitted: Wednesday, Dec 27, 2006 at 17:22
ThreadID:
40663
Views:
2117
Replies:
3
FollowUps:
1
This Thread has been Archived
mrturtle
Gidday All,
Can anyone tell me if they have tried to fit the third row of seats to a 100 series standard diesel before... If so any issues, or they cant be fitted.
Cheers
Turtle
Reply By: Member - Tim - Stratford (VIC) - Wednesday, Dec 27, 2006 at 19:19
Wednesday, Dec 27, 2006 at 19:19
Mr T (?),
I believe they can be fitted fairly easily - the bolt holes are the same but you'll need to cut the flooring to find them - unless you can measure off a GXL. I'm only going from info off other sites so I hope this is right.....
The only other issue is the legality of changing the number of seats - you'd have to check with the rego mob in your State.
Tim - Stratford.
AnswerID:
212219
Reply By: spliney - Wednesday, Dec 27, 2006 at 19:40
Wednesday, Dec 27, 2006 at 19:40
Turtle
I had an after-market set fitted in Qld at point of purchase of my second-hand 100 series standard diesel. So cleraly it's possible.
Get back to me if you want details.
Regards
Spliney
AnswerID:
212223
Follow Up By: spliney - Wednesday, Dec 27, 2006 at 20:11
Wednesday, Dec 27, 2006 at 20:11
Should have added that the installation included compliancing.
Spliney
FollowupID:
472499
Reply By: Member - DOZER- Wednesday, Dec 27, 2006 at 19:52
Wednesday, Dec 27, 2006 at 19:52
Not 100% sure about the 100, but the 80 std was made missing all the threads for seatbelts etc etc...so it is not a simple bolt in...presume the 100 is thesame
AnswerID:
212226