Add photograph to post
Submitted: Tuesday, Aug 14, 2007 at 23:32
ThreadID:
48716
Views:
1916
Replies:
6
FollowUps:
20
This Thread has been Archived
Member - Longtooth (SA)
Having trouble adding a photo to a post. You will all be interested and cranky at the same time at how we are being ripped off in Australia. The sooner you tell me how the sooner you find out what it's all about. Can't seem to find the answer anywhere on the site. Thanks
Reply By: Member - JohnR (Vic)&Moses - Tuesday, Aug 14, 2007 at 23:41
Tuesday, Aug 14, 2007 at 23:41
toothy, you have to go to
My Home and then to edit My Profile to add a signature and that will bring up what you need for your rig pic to show assuming you have added a Rig Pic to Your Rig.
I don't know what we are being ripped of about, but its probably best in another post than asking about your signature!
The answer is easy. Photos are easy to add too. You Just need to click on [Insert Image] below and paste the address in where the photo is located
AnswerID:
257305
Follow Up By: Member - Roachie (SA) - Wednesday, Aug 15, 2007 at 08:22
Wednesday, Aug 15, 2007 at 08:22
Just thought I'd test this for myself as I'm not sure either:
See how that goes????
FollowupID:
518532
Follow Up By: Member - Roachie (SA) - Wednesday, Aug 15, 2007 at 08:23
Wednesday, Aug 15, 2007 at 08:23
OK, so that didn't work.......
FollowupID:
518533
Follow Up By: Member - Roachie (SA) - Wednesday, Aug 15, 2007 at 08:24
Wednesday, Aug 15, 2007 at 08:24
Hmmmmmmmmmmmm, 3rd time lucky, maybe?????
[img]http://
[/img]
FollowupID:
518534
Follow Up By: Member - Roachie (SA) - Wednesday, Aug 15, 2007 at 08:26
Wednesday, Aug 15, 2007 at 08:26
OK, so as you all know, I'm technilogically challenged; but I'll give it one more shot:
FollowupID:
518535
Follow Up By: Member - Roachie (SA) - Wednesday, Aug 15, 2007 at 08:28
Wednesday, Aug 15, 2007 at 08:28
Stuff-it; I know when I'm beaten!!!!! This is b u l l s h i t !!!!!!
FollowupID:
518536
Follow Up By: Gramps (NSW) - Wednesday, Aug 15, 2007 at 08:36
Wednesday, Aug 15, 2007 at 08:36
Try anything once
have to work on the size bit though :)))
FollowupID:
518537
Follow Up By: Member - JohnR (Vic)&Moses - Wednesday, Aug 15, 2007 at 08:45
Wednesday, Aug 15, 2007 at 08:45
Giant Poster size Gramps!
Well done with the imagery
FollowupID:
518541
Follow Up By: Member - JohnR (Vic)&Moses - Wednesday, Aug 15, 2007 at 08:49
Wednesday, Aug 15, 2007 at 08:49
Roachie, you find a picture on the web. Right click on it and try to copy the address to the clip board. Get to where you are to post and click on [Insert Image] below and you will be given a box that gives http etc. Just put in the address as that is ready to type it in, click OK and the code will be posted in the FollowUp box ready to preview or submit.
FollowupID:
518542
Follow Up By: Member - Roachie (SA) - Wednesday, Aug 15, 2007 at 08:49
Wednesday, Aug 15, 2007 at 08:49
One last try before I head off to work.......
FollowupID:
518543
Follow Up By: Gramps (NSW) - Wednesday, Aug 15, 2007 at 08:52
Wednesday, Aug 15, 2007 at 08:52
JohnR,
LOL methinks David is still working on the auto resizing for these posts.
FollowupID:
518544
Follow Up By: Member - JohnR (Vic)&Moses - Wednesday, Aug 15, 2007 at 09:29
Wednesday, Aug 15, 2007 at 09:29
It was just that you managed to get the comments aboard that mattered Gramps. I remember Lucy had a wide screen model over the weekend.
Roachie,
well done mate. Lucy knows if you don't have a photo it didn't happen, so you will be able to prove it as I did with Trevor's flag in Rome. It asked to go to to see Dad, Trevor, but the Italians who pronounce every letter in a word trying to understand the Queensland accent took him to Trevi, the fantastic Papal fountain.
FollowupID:
518554
Follow Up By: Member - Brian H (QLD) - Wednesday, Aug 15, 2007 at 09:46
Wednesday, Aug 15, 2007 at 09:46
Might give it a go
FollowupID:
518560
Follow Up By: Member - Brian H (QLD) - Wednesday, Aug 15, 2007 at 09:49
Wednesday, Aug 15, 2007 at 09:49
As I figured [img]
[/img]
FollowupID:
518561
Follow Up By: Member - Brian H (QLD) - Wednesday, Aug 15, 2007 at 09:50
Wednesday, Aug 15, 2007 at 09:50
[img]http://
[/img]
FollowupID:
518564
Follow Up By: Member - Brian H (QLD) - Wednesday, Aug 15, 2007 at 09:51
Wednesday, Aug 15, 2007 at 09:51
Give up for now
Brian
FollowupID:
518565
Follow Up By: Member - Roachie (SA) - Wednesday, Aug 15, 2007 at 13:08
Wednesday, Aug 15, 2007 at 13:08
Just to make sure it wasn't a fluke last time.............
Pesty STUCK!!!!!!!!!!!!!!!!!!!!
FollowupID:
518600
Follow Up By: Member - Roachie (SA) - Wednesday, Aug 15, 2007 at 13:16
Wednesday, Aug 15, 2007 at 13:16
Pud gets a flatty on the
Oodnadatta Track
FollowupID:
518601
Reply By: Member - Ruth D (QLD) - Wednesday, Aug 15, 2007 at 11:12
Wednesday, Aug 15, 2007 at 11:12
OK, so I put a new Rig Picture in but now can't enlarge it - what did I do wrong please? (Don't all rush to tell me now).
AnswerID:
257344
Follow Up By: Member - JohnR (Vic)&Moses - Wednesday, Aug 15, 2007 at 15:33
Wednesday, Aug 15, 2007 at 15:33
When I clicked on your rig
pic Ruth, it said you had Gone Bush (WA). Is that something significant you haven't told us? I don't know what the link up is, perhaps ask David or Ian ;-)
FollowupID:
518620
Follow Up By: Member - Brian H (QLD) - Wednesday, Aug 15, 2007 at 15:56
Wednesday, Aug 15, 2007 at 15:56
Yep got the same as
John, Ruth. I cannot help you I'm still trying to get one to ooad on here :)
Brian
FollowupID:
518625
Follow Up By: Member - Ruth D (QLD) - Wednesday, Aug 15, 2007 at 19:26
Wednesday, Aug 15, 2007 at 19:26
JR, that's because the caption supposed to say Gone Bush (WA) and Doyles Utes.
FollowupID:
518667
Reply By: Member - Brian H (QLD) - Wednesday, Aug 15, 2007 at 16:01
Wednesday, Aug 15, 2007 at 16:01
Another go
AnswerID:
257367
Reply By: Member - Brian H (QLD) - Wednesday, Aug 15, 2007 at 16:11
Wednesday, Aug 15, 2007 at 16:11
Hmmmmmmm size a bit out thats for sure. See how this goes
AnswerID:
257368
Reply By: Member - Brian H (QLD) - Wednesday, Aug 15, 2007 at 16:14
Wednesday, Aug 15, 2007 at 16:14
Well longtooth I'm using Photobucket to load my photo's into and then copy and paste the URL into "insert image" on this site and seems to be working for me.
Brian
AnswerID:
257370
Reply By: Richard W (NSW) - Wednesday, Aug 15, 2007 at 20:31
Wednesday, Aug 15, 2007 at 20:31
Here's a pano of Wolf Creek crater:
1. Host your photo on the web. eg.your ISP, photobucket etc.
2. Use the insert image button and copy the link from where the photo is being hosted into your post.
AnswerID:
257433