Non working tail lights on GU S111 Patrol.
Submitted: Wednesday, Aug 22, 2007 at 05:26
ThreadID:
48926
Views:
2099
Replies:
1
FollowUps:
2
This Thread has been Archived
Member - Brad G (QLD)
Hi all, I know this has come up before and I have been sifting through the archives but have been unable to find the actual process for making the RHS reverse light and brake lights work ( the ones in the reverse light assembly that is) I have a 2 wire cable and plug on the RHS just floating. Havn't yet tested with a multi meter but hoping this is reverse and brake feeds. Is there anyone who has done this mod and can suggest the appropriate parts a and fitting procedure etc.
Many thanks in advance
Brad
Reply By: Shawn - Wednesday, Aug 22, 2007 at 10:11
Wednesday, Aug 22, 2007 at 10:11
Brad have a look at post 4782. hope it helps.
Cheers
Shawn
AnswerID:
258421
Follow Up By: Shawn - Wednesday, Aug 22, 2007 at 10:36
Wednesday, Aug 22, 2007 at 10:36
Brad,
Posts: 24786, 14001, 13555, 15474 may help
Cheers
FollowupID:
519735
Follow Up By: Member - Brad G (QLD) - Thursday, Aug 23, 2007 at 10:11
Thursday, Aug 23, 2007 at 10:11
Thanks Shawn. These posts were very helpful - part nos everything. mustn't have been driving the search engine properly!
thanks again'Brad
FollowupID:
519919