Bit of an update on the new camper trailer.
Submitted: Wednesday, Nov 14, 2007 at 20:25
ThreadID:
51607
Views:
3501
Replies:
2
FollowUps:
6
This Thread has been Archived
Member - Kim M (VIC)
Finally got the CTEX charger installed in the tool box, which was a bit of an interesting exercise, given that the hammer drill was within a couple of mm of the width of the box...sweating and swearing as usual!
Fixed the problem with the gas cradles.
Made up a 15/10amp adapter.
Purchased and fitted marine carpet into the trailer to reduce the slide. Tie down points to come.
Rang the manufacture to ask why the press studs weren't supplied for the draft skirt.
Spent a fair bit of time trying to figure out how to connect the number plate to the tail
gate without having to drill into the back of the kitchen.
Looked at the spare wheel, and started to wonder how it could be lifted over the stone guard without getting a hernia.
Purchased stick on labels for the
water containers. "F" for fresh, "B" for
bore.
The thing will be register tomorrow (hopefully), then dog and I are going bush..... That's when the blue's are going to start.
So if you see a couple of nutters arguing in the bush, walk away!
Regards
Kim
Reply By: Footloose - Wednesday, Nov 14, 2007 at 22:43
Wednesday, Nov 14, 2007 at 22:43
You rekkon you'll go bush happy ? Like the swaggie fighting with his swag ? heheheh
AnswerID:
271775
Follow Up By: Member - Kim M (VIC) - Wednesday, Nov 14, 2007 at 23:04
Wednesday, Nov 14, 2007 at 23:04
Footloose
Dog and I'll be ok....as long as she gets whats she wants!
How are your bush meaandering going?
Regards
Kim
FollowupID:
534814
Follow Up By: Footloose - Wednesday, Nov 14, 2007 at 23:18
Wednesday, Nov 14, 2007 at 23:18
I'm at the stage when you start to look backwards rather than forwards. When you look at new cars you can't afford and don't even lust after them. Or much else.(and if you believe that then the pollies love you :)
Crikey, I only just got back from
Perth and already I know I need to get outta here again.
FollowupID:
534816
Reply By: Member No 1- Thursday, Nov 15, 2007 at 08:00
Thursday, Nov 15, 2007 at 08:00
????!!!!?????
why would one be using a hammer dril on their camper....I thought campers were made of steel and not bricks and motar, unless of course you got a brick dunny house on it?
AnswerID:
271798
Follow Up By: Member - Kim M (VIC) - Thursday, Nov 15, 2007 at 18:14
Thursday, Nov 15, 2007 at 18:14
No 1
These days a drill can be used either in hammer, or normal mode. I was refering to the size of the drill in cramped conditions.
A brick dunny would probably have made it easier!
LOL
Regards
Kim
FollowupID:
534894
Follow Up By: Member No 1- Thursday, Nov 15, 2007 at 18:21
Thursday, Nov 15, 2007 at 18:21
but one doesnt use a hammerdrill in hammer mode on steel
still trying to figure out what you mean about size in cramped conditions and its relationship to hammerdrill.....
FollowupID:
534896
Follow Up By: Member - Kim M (VIC) - Thursday, Nov 15, 2007 at 19:55
Thursday, Nov 15, 2007 at 19:55
Think I detect a No 1 stir here, but what the hell.
I'm going to type real slow now......!
Hammer drill? yes.
Big mother? yes.
Drilling mode? Normal (not Hammer).
Lot of profanity? yes. Was dog happy with this carry on? No.
LOL
PS Told the girls at work about your reference to wedding dresses. Did'nt seem to go down all that
well. Their a sentitive bunch!!!
Regards
Kim
FollowupID:
534914
Follow Up By: Member No 1- Thursday, Nov 15, 2007 at 21:23
Thursday, Nov 15, 2007 at 21:23
"Was dog happy with this carry on? No"
what did you expect...hanmmer drills are noisy
they aint amused eh? try this one
"I don't worry about terrorism. I was married for two years."
FollowupID:
534940