Canvas & Vinyl questions?

Submitted: Sunday, Feb 03, 2008 at 13:49
ThreadID: 54188 Views:2240 Replies:2 FollowUps:2
This Thread has been Archived
Questions re any canvas matters ? Go back to Thread 54080 date 31-1-08.
The ulterior motive? By you asking and me answering questions without bias, I am doing market research as to what information you are looking for. And what the main problems are.
That information is usefull to me in the design of canvas products..
Thanking all those that already have replied. So far, it appears to be waterproofing, maintainance problems.

Regards. BR
Back Expand Un-Read 0 Moderator

Reply By: BR - Sunday, Feb 03, 2008 at 14:05

Sunday, Feb 03, 2008 at 14:05
PS; As most members and visitors to this site are campers, fishermen, outdoor enthusiasts etc. and 99% would own and use products that are made of canvas such as Camper trailers, Caravan annexes, Tents, Tarpaulins, Canopies etc. etc. etc. This is an excelent area to find out about problems.

Thanking You. BR
AnswerID: 285339

Reply By: George_M - Sunday, Feb 03, 2008 at 16:24

Sunday, Feb 03, 2008 at 16:24
Hi BR.

A question relating to repairing small holes in a Freedom tent.

I have a couple of holes in the floor that water weeps through. These holes seem to have been caused by standing on stones or sticks under the floor. I now use a canvas ground sheet, but how should I repair the holes in the floor?

George_M

Come any closer and I'll rip your throat out!

Lifetime Member
My Profile  My Blog  My Position  Send Message

AnswerID: 285375

Follow Up By: BR - Monday, Feb 11, 2008 at 18:12

Monday, Feb 11, 2008 at 18:12
If the holes are small, use a bit of Silicone glass sealant, squeeze it through the hole and spread it out on both sides. not many glues will stick to polyethelene floors, unless your Freedom tent has a PVC floor, in which case you can glue patches on with an acetone/ketone based glue. See other feedback for more detail. Regards, BR
0
FollowupID: 552133

Follow Up By: George_M - Monday, Feb 11, 2008 at 18:22

Monday, Feb 11, 2008 at 18:22
Thanks BR - much appreciated.

George_M
Come any closer and I'll rip your throat out!

Lifetime Member
My Profile  My Blog  My Position  Send Message

0
FollowupID: 552136

Sponsored Links