our codan needs VKS737
Submitted: Tuesday, Feb 05, 2008 at 23:46
ThreadID:
54289
Views:
2565
Replies:
6
FollowUps:
3
This Thread has been Archived
Member - Oppikofer L (Int)
G'day folks,
for our 11 months lasting trip around Australia we got ourselves a Codan 9323
HF Radio.
But since we are absolute beginners in the field of
HF Radio business we are looking for a
shop or a person in the
Perth area which could give us assistance in the following:
- setting up and wire up the whole set in the car including antenna
-
test the whole equipment
- reprogram the
HF radio to support the VKS737 network
- and last but not least....give us an introduction on how to operate this kind of radio.
we are looking forward to any hints.....
have a nice one - lukas
Reply By: Member - Doug T (FNQ) - Tuesday, Feb 05, 2008 at 23:53
Tuesday, Feb 05, 2008 at 23:53
I think you will fibd the VKS frequencies are already in it
VKS-737 Website
.
AnswerID:
285898
Reply By: Member - Stephen (WA) - Tuesday, Feb 05, 2008 at 23:55
Tuesday, Feb 05, 2008 at 23:55
Hi Lukas,
You could try Terlin Outbacker in Canning Vale ph 08 9455 4288.
I'm actually having a new Codan installed by them on Thursday.
They do the VKS737 stuff as
well. The fellow I dealt with (Terry?) was very knowlegable and does training as
well.
Regards
Stephen J.
AnswerID:
285899
Follow Up By: Member - Oppikofer L (Int) - Wednesday, Feb 06, 2008 at 00:02
Wednesday, Feb 06, 2008 at 00:02
g'day Stephen,
thanks for your hint.
sent already 4 mails to Terlin....no reply from them so far!
may be, if you remember, you could kick their leg for me meeting them next Thursday ;-)))
have a nice one - lukas
FollowupID:
550885
Follow Up By: Member - Davoe (Yalgoo) - Thursday, Feb 07, 2008 at 19:36
Thursday, Feb 07, 2008 at 19:36
Was there on monday my Multi tap busted internally again so i went there for a newy
FollowupID:
551269
Reply By: paro - Wednesday, Feb 06, 2008 at 09:32
Wednesday, Feb 06, 2008 at 09:32
Try Henry Edwards [ph 0408 956 250]. He installs UHF & HF radios for St
John Ambulance. Henry has done work for me. He knows his stuff and doesn't over-charge.
AnswerID:
285921
Reply By: Member - bungarra (WA) - Wednesday, Feb 06, 2008 at 09:43
Wednesday, Feb 06, 2008 at 09:43
Bushcomm Pty Ltd 08 9296 0496 Fax 08 9296 0495
email is bushcomm@bigpond.com www bushcomm.com.au
Those contact details are a couple of years old ...they are at Herne
Hill (Near Midland roughly)..........used them twice..very helpful...pricing very fair....nice people
also suggect you consider radtel frequencies if you need to make a phone call
AnswerID:
285924
Reply By: Member - Doug T (FNQ) - Wednesday, Feb 06, 2008 at 09:48
Wednesday, Feb 06, 2008 at 09:48
Here in ExplorOz there is a section that you will gain some valuable information.
HF Radio section
.
AnswerID:
285926
Reply By: SteveL - Thursday, Feb 07, 2008 at 17:44
Thursday, Feb 07, 2008 at 17:44
You could try Allcom in Belgravia St. Belmont.
They have an ex-codan tech. working for them.
AnswerID:
286166
Follow Up By: Mike - Thursday, Feb 07, 2008 at 18:17
Thursday, Feb 07, 2008 at 18:17
I purchased my Codan Ngt from Allcom they did a great job of installing and setting the radio up with the right frequencies, I recommend them for what it is worth
FollowupID:
551245