Tyre Sizes
Submitted: Sunday, Mar 09, 2008 at 09:07
ThreadID:
55354
Views:
1687
Replies:
6
FollowUps:
5
This Thread has been Archived
Member - Iceman (VIC)
Hi everyone,
Can someone let me know what the imperial size is for 285/75 R16 it would be much appreciated.
Regards,
Iceman
Reply By: Axel [ the real one ] - Sunday, Mar 09, 2008 at 09:32
Sunday, Mar 09, 2008 at 09:32
www.1010tires.com
AnswerID:
291735
Follow Up By: Member - Iceman (VIC) - Sunday, Mar 09, 2008 at 10:04
Sunday, Mar 09, 2008 at 10:04
Thanks Axel,
That site helped heaps. i was just confuesed with the Tyre calculator on Explor Oz
FollowupID:
557065
Reply By: Wayne's 60 - Sunday, Mar 09, 2008 at 09:38
Sunday, Mar 09, 2008 at 09:38
Hi Iceman,
Try the on site
Calculator
Roughly 33 inch.
Cheers,
Wayne.
AnswerID:
291738
Follow Up By: Member - Iceman (VIC) - Sunday, Mar 09, 2008 at 10:04
Sunday, Mar 09, 2008 at 10:04
Thanks for that I did look at it but was sightly confused
FollowupID:
557066
Reply By: Member - Graham H (QLD) - Sunday, Mar 09, 2008 at 12:53
Sunday, Mar 09, 2008 at 12:53
Heres a really good one that does offset and everything
http://www.rims-n-tires.com/rt_specs.jsp
AnswerID:
291762
Follow Up By: Member - Iceman (VIC) - Monday, Mar 10, 2008 at 08:46
Monday, Mar 10, 2008 at 08:46
Thanks,
Had a look at this site really good
FollowupID:
557225
Reply By: Bonz (Vic) - Sunday, Mar 09, 2008 at 13:33
Sunday, Mar 09, 2008 at 13:33
Imperial size is HIROHITO
the 265/75 imperial size is GHANDI
AnswerID:
291768
Reply By: Steve - Sunday, Mar 09, 2008 at 21:24
Sunday, Mar 09, 2008 at 21:24
And why would you want to know ? (there is none) ..
AnswerID:
291839
Follow Up By: Member - Iceman (VIC) - Monday, Mar 10, 2008 at 08:47
Monday, Mar 10, 2008 at 08:47
My son asked what the equivalent imperial size was, Thanks
FollowupID:
557226
Reply By: Wayne (NSW) - Monday, Mar 10, 2008 at 08:03
Monday, Mar 10, 2008 at 08:03
Iceman,
285x75x16
285 is the width of the tyre in mm. converted to inches =11.220
to round off that would be a 11 1/4" wide
75 is the percentage of the width of the tyre that makes up the side wall
75% of 11 1/4 = 8.415" rounded off 8 3/8" side wall
To find the overall height of the tyre 16" rim size + 2x side wall
16 + 8 3/8 + 8 3/8 = 32 3/4 rounded off 33"
So to answer you question the tyre would be 33" x 11" x 16"
I think that the nearest size would be 33x11.5x33
Wayne
AnswerID:
291863
Follow Up By: Member - Iceman (VIC) - Monday, Mar 10, 2008 at 08:28
Monday, Mar 10, 2008 at 08:28
Thanks for your note. I was looking for tyres for my 3.0 Lt patrol and my son asked what the imperial sizes was as there are a lot in the trading post. So thanks for the assistance.
FollowupID:
557221