KayMar swing arms are they interchangeable?
Submitted: Friday, May 02, 2008 at 21:15
ThreadID:
57214
Views:
2438
Replies:
3
FollowUps:
0
This Thread has been Archived
Member - Rodney B (NSW)
I Have access to a wheel carrier from a 80 series. Does any one know if this will fit my GUIV that already has a Kaymar bar with twin pivot positions?
Reply By: Member - 120scruiser (NSW) - Friday, May 02, 2008 at 21:48
Friday, May 02, 2008 at 21:48
Not sure but if you don't want it let me know and I will buy it. the stud pattern will be the same. Probably have to try it.
AnswerID:
301768
Reply By: Member - Howard (ACT) - Saturday, May 03, 2008 at 20:42
Saturday, May 03, 2008 at 20:42
Rodney,
cannot say if the 80 series unit will fit the patrol but if the arm is off a single carrier I think you will find it is longer than the arm on the twin unit .
a mate had to cut down his old single arm when he converted to twin carrier.
single unit on my 80 series latches past centre of vehicle. this allows fitment without wheel obstructing tail light.
you may get away with using the single arm and just relocating the latch to suit.
might be a case opf suck and see I'm afaid.
cheers
Howard
AnswerID:
301897
Reply By: Graham & Lynne - Sunday, May 04, 2008 at 22:11
Sunday, May 04, 2008 at 22:11
Rodney B (NSW)
If the arm fits the twin pivot mount, I would like to buy the gold coloured under bar mount/reinfoce & bolts off you,As I have the black Kaymar swing arm & nothing else.
Thanks Graham
AnswerID:
302050