King Wheels
Submitted: Saturday, May 24, 2008 at 21:54
ThreadID:
57963
Views:
10062
Replies:
4
FollowUps:
4
This Thread has been Archived
Member - Wayne57 (WA)
Hi All, first time post.
Looking at replacing my alloy rims on my 2007 GU Patrol with Steel King Rims has anyone used these and what do you think of them
Reply By: Anthony (Vic) - Monday, May 26, 2008 at 12:51
Monday, May 26, 2008 at 12:51
I bought 17 by 8 inch King steels with a 30mm positive offset.
They work fine. Look ok as
well (got the black finish). The finish on the edges around the inside of the holes is a bit rough. They don't machine off the burr after stamping out the centres.
Also, the inside clearance between the caliper and rim, you would be lucky if you can get a tallyho paper in
the gap. I paid $150 each for 8. If I had a bit of time I think I could have done it a bit cheaper.
AnswerID:
305929
Follow Up By: Member - Wayne57 (WA) - Monday, May 26, 2008 at 20:36
Monday, May 26, 2008 at 20:36
Anthony
Thanks for the
feedback, I think I will look around at some other options.
Regards,Wayne
FollowupID:
572039
Reply By: jay4wd - Monday, May 26, 2008 at 18:38
Monday, May 26, 2008 at 18:38
Hi Wayne,
I bought 5 steel king rims in 16x7 late last year. Did a trip to
corner country and plenty of local stuff every weekend and have had no issues. Anthony you definatly can do better i paid $95 each. I would recomend them and the black does look pretty good.
AnswerID:
305974
Follow Up By: Member - Wayne57 (WA) - Monday, May 26, 2008 at 20:39
Monday, May 26, 2008 at 20:39
Jay4wd,
Thanks for the info, as I said to Anthony I think I will look around at some other options and then decide.
Regards, Wayne
FollowupID:
572041
Follow Up By: Anthony (Vic) - Tuesday, May 27, 2008 at 15:44
Tuesday, May 27, 2008 at 15:44
Jay4wd
$95 is a very good price. Maybe there is more competion for 16inch rims than for 17inch.
King were the only 17inch steels I could find. After I bought the rims, I was quoted $140 each at another tyrepower dealer for the same product.
FollowupID:
572132
Follow Up By: jay4wd - Wednesday, Jun 18, 2008 at 21:42
Wednesday, Jun 18, 2008 at 21:42
Anthony didnt even think of price difference between whell size. I also bought 5 bfg muddies so maybe they knocked a bit of the wheels
FollowupID:
576830
Reply By: HGMonaro - Thursday, Jun 19, 2008 at 11:09
Thursday, Jun 19, 2008 at 11:09
I bought 17x8's (can't remember the brand) @ $115 each (for a Prado). Could have gotten them cheaper ($105) but that mob wanted more for the tyres I wanted to go with them. Black ones were about $10/rim dearer. this was in Melb.
Cheers, Nige
AnswerID:
310923
Reply By: Peter McG (Member, Melbourne) - Thursday, Jun 19, 2008 at 11:35
Thursday, Jun 19, 2008 at 11:35
I used 16x8 ROH wheels in black on my Patrol. The 16 wheels are cheaper and tyres easier to get outback. Cost was about $110
Peter
AnswerID:
310930