Codan 9323

Submitted: Monday, Jun 16, 2008 at 00:40
ThreadID: 58834 Views:1779 Replies:5 FollowUps:3
This Thread has been Archived
Can anyone point me in the right direction for codan spare parts?
I have just privatelt bought a 2nd hand codan 9323 and found I cannot transmit. Service agent has advised final outputs need replacing as well as membrane that sits behind remote head keypad and screen(not all buttons work)

Thanks...in anticipation.....


Mal
Back Expand Un-Read 0 Moderator

Reply By: Member - Pedro the One (QLD) - Monday, Jun 16, 2008 at 01:20

Monday, Jun 16, 2008 at 01:20
Mal .... iffen you can wait 'till the morrow, I will look up an address and eMail thingy for you ..... this bloke did my 9323 Codan a few months back, lives in Gympie [QLD] though .... is that relevant ?? Where are you ??

Was very reasonable and got my set working OK ..... and will be sending him a couple more for similar treatment. He cuirrently has a remote 'head' of mine with similar problems to yours !!

Should have this info by tomorrow night ......................
AnswerID: 310240

Follow Up By: Member - Pedro the One (QLD) - Wednesday, Jun 18, 2008 at 01:37

Wednesday, Jun 18, 2008 at 01:37
Mal ..............
contact is Mike Iredale & eMail is cqmike at spiderweb dot com dot au revised.

I found him as an eBay seller of Comm. gear, contacted him ... most helpful and knows his stuff. I'm sure he can help, iffen the tyranny of distance doesn't interfere. Charges were very reasonable ...... he'll give you a quote first and is not a large business, think he works from home.

Hope this helps....... would recommend him.
0
FollowupID: 576687

Reply By: Member - Footloose - Monday, Jun 16, 2008 at 08:14

Monday, Jun 16, 2008 at 08:14
Try these people...they have the spares ans service.
AnswerID: 310260

Follow Up By: Member - Footloose - Monday, Jun 16, 2008 at 08:14

Monday, Jun 16, 2008 at 08:14
ans=and
0
FollowupID: 576289

Follow Up By: Member - Footloose - Monday, Jun 16, 2008 at 08:21

Monday, Jun 16, 2008 at 08:21
Or you could ring David in Brisbane on 0408345208 if you want to have a chat about it and possibly get it fixed.
0
FollowupID: 576291

Reply By: Vivid Adventures - Monday, Jun 16, 2008 at 08:36

Monday, Jun 16, 2008 at 08:36
Try Radio Specialists: (08) 8298 3906
AnswerID: 310269

Reply By: MEMBER - Darian (SA) - Monday, Jun 16, 2008 at 09:01

Monday, Jun 16, 2008 at 09:01
Your location ? I sent my Barrett back to the factory in Perth for a repair - excellent service and very (very) reasonable pricing all up.
Maybe Codan in the Adelaide head office would do the same for you ?
AnswerID: 310277

Reply By: W273 - Thursday, Jun 19, 2008 at 01:52

Thursday, Jun 19, 2008 at 01:52
Thanks to all who replied. I forgot to mention I was in Perth - well 2 and a half hours south of Perth. I have found a contact in Perth but will try some of your suggestions when hunting down parts.

Many thanks

Mal
AnswerID: 310882

Sponsored Links

Popular Products (14)