Tomorrow's Project...A Seed Screen

Submitted: Friday, Jan 02, 2009 at 19:35
ThreadID: 64744 Views:3584 Replies:10 FollowUps:14
This Thread has been Archived
I started making a seed screen this arvo.

I actually want to make two that will fit on the bullbar, either side(front and back). And then also have a screen over the grille and underneath the radiator.

Are there any fresh ideas out there on making such devices? I have plenty of scrap metal etc.

Photos would be helpful.

Cheers
Back Expand Un-Read 0 Moderator

Reply By: Member - Mick O (VIC) - Friday, Jan 02, 2009 at 20:19

Friday, Jan 02, 2009 at 20:19
Greeting W,

prior to heading up the Hunt Oil Road last year, while at Warburton, I removed the thermatic fan of the Patrol radiator and fitted the fibreglass flyscreen mesh across the radiator securing it with cable ties and then fitting the fan back on top. The I used shade cloth across the bullbar as well. Worked very well and didn't impede the air flow to the radiator at all. A lot easier than making screens.

Cheers

Mick
''We knew from the experience of well-known travelers that the
trip would doubtless be attended with much hardship.''
Richard Maurice - 1903

Lifetime Member
My Profile  My Blog  My Position  Send Message

AnswerID: 342309

Follow Up By: Willem - Friday, Jan 02, 2009 at 21:20

Friday, Jan 02, 2009 at 21:20
Thanks for that Mick. I seem to recall you having mwntiond that before. Definitely something to look at

Cheers
0
FollowupID: 610018

Reply By: Richard Kovac - Friday, Jan 02, 2009 at 21:04

Friday, Jan 02, 2009 at 21:04
Willem

not sure what you mean, but we made one out of shade cloth and Robyn sowed some elastic cord in a hem, and it just snaps over the hole bull bar. A bit like a water crossing bra

have no photos of it but could take some

Richard
AnswerID: 342316

Follow Up By: Willem - Friday, Jan 02, 2009 at 21:25

Friday, Jan 02, 2009 at 21:25
Yeah...I usually do that with cable ties but last time out bush a lot of grass seeds still got inbetween the radiators. So now I want to make something that will stop that but still give enough airflow to the radiator.


Cheers
0
FollowupID: 610020

Follow Up By: Richard Kovac - Friday, Jan 02, 2009 at 21:28

Friday, Jan 02, 2009 at 21:28
Maybe try getting a blower fan and swap it when in the bush and on the trail?
0
FollowupID: 610021

Reply By: Peter_n_Margaret - Friday, Jan 02, 2009 at 23:48

Friday, Jan 02, 2009 at 23:48
The OKA radiator is high enough not to be a problem, but I carry screens for the intercooler that are attached via velcro strips.

Cheers,
Peter
OKA196 Motorhome
AnswerID: 342345

Follow Up By: Willem - Saturday, Jan 03, 2009 at 00:49

Saturday, Jan 03, 2009 at 00:49
Thanks Peter


Haven't thought of Velcro.

I have thought of fitting 900x16 tyres though but have to wear out the present set of 7.50x16's first. Not sure what 900's will do to the overall performance of the GQ.


Cheers


0
FollowupID: 610049

Reply By: Richard W (NSW) - Saturday, Jan 03, 2009 at 07:39

Saturday, Jan 03, 2009 at 07:39
I bought an insect screen when I purchased the vehicle and although not recomended for the turbo diesel I have not had any dramas. Holes may be a bit big for seeds though.



Had a bash plate made up which comes right up under the bull bar after I did a couple of radiators through water crossings. (another story)



There is a gap in the bull bar which is still an exposure to the radiator.


AnswerID: 342364

Reply By: Richard W (NSW) - Saturday, Jan 03, 2009 at 07:40

Saturday, Jan 03, 2009 at 07:40
I bought an insect screen when I purchased the vehicle and although not recomended for the turbo diesel have not had any dramas. Holes may be a bit big for seeds though.



Had a bash plate made up which comes right up under the bull bar.



There is a small gap in the bull bar which is an exposure.
AnswerID: 342365

Follow Up By: Richard W (NSW) - Saturday, Jan 03, 2009 at 07:41

Saturday, Jan 03, 2009 at 07:41
Double post. :oops
0
FollowupID: 610059

Follow Up By: Willem - Saturday, Jan 03, 2009 at 09:59

Saturday, Jan 03, 2009 at 09:59
Thanks Richard

Your bash plate fits in nicely with the IFS suspension. I have been looking at something like that but haven't worked it out yet. Maybe today when I am under the truck



Cheers
0
FollowupID: 610074

Follow Up By: KiwiAngler - Saturday, Jan 03, 2009 at 11:46

Saturday, Jan 03, 2009 at 11:46
Richard

I notice a trailer type light fitting on your front bullbar - interested in it's purpose
0
FollowupID: 610092

Follow Up By: Richard W (NSW) - Saturday, Jan 03, 2009 at 14:07

Saturday, Jan 03, 2009 at 14:07
Had to have the solenoids replaced for the winch. The old plug for the controller was replaced with a normal trailer plug.
0
FollowupID: 610118

Reply By: Member - Willie , Sydney. - Saturday, Jan 03, 2009 at 09:40

Saturday, Jan 03, 2009 at 09:40
G'day Willem,

We just tie a big sheet of shade cloth across the bull bar and let it hang down under the front of the car. It gets torn after a few days, so I carry an extra bit to replace it. Works perfectly.

Those "talc eggs" in your photo, that are found on the track into Desert Queen Bathes - I doubt that it's talc - I always meant to get some analysed, but kept forgetting. Does anybody have any ideas about this ? I thought maybe it might be something a bit more nasty - maybe radio active.

Cheers,

Willie.
AnswerID: 342387

Follow Up By: Willem - Saturday, Jan 03, 2009 at 10:02

Saturday, Jan 03, 2009 at 10:02
Willie

The Talc egg could be White Ochre which probably the same thing.

I should be out that way again this year so hope to remember to take a sample and will send it to you to get analysed (for the wont of something to do...lol)

How's the dreaming going with the Ute, the Boat and the Quad?


Cheers
0
FollowupID: 610075

Follow Up By: Member - Willie , Sydney. - Saturday, Jan 03, 2009 at 11:02

Saturday, Jan 03, 2009 at 11:02
Willem,
I think "white ochre" could probably be a number of different things. A sample YES, to solve this conundrum.
Thanks,
Willie.
0
FollowupID: 610081

Reply By: Hairy (NT) - Saturday, Jan 03, 2009 at 13:51

Saturday, Jan 03, 2009 at 13:51
Just a thought..........
LOL
Happy New Year Willem and Judith

Image Could Not Be Found
AnswerID: 342418

Follow Up By: Willem - Saturday, Jan 03, 2009 at 13:57

Saturday, Jan 03, 2009 at 13:57
Ahhhh......yer a naughty bugger!!

Happy New Year you and the family

Is 2009 going to be the year of shifting camp?


Cheers
0
FollowupID: 610108

Follow Up By: Hairy (NT) - Saturday, Jan 03, 2009 at 14:31

Saturday, Jan 03, 2009 at 14:31
Yeah mate...
Ill finish the house and put it on the market as soon as I can stop breaking bones!!!!
0
FollowupID: 610124

Reply By: Dave B (NSW) - Saturday, Jan 03, 2009 at 20:13

Saturday, Jan 03, 2009 at 20:13
Now if you reversed all the way through the grass, you wouldn't have a problem with the seeds. hahaha

Dave
'Wouldn't be dead for quids'

Lifetime Member
My Profile  My Blog  Send Message

AnswerID: 342466

Follow Up By: Willem - Saturday, Jan 03, 2009 at 22:51

Saturday, Jan 03, 2009 at 22:51
Hmmmm...you must still be full of New Year Cheer, eh?


Smart A.............lol
0
FollowupID: 610183

Reply By: Member - Duke (TAS) - Saturday, Jan 03, 2009 at 22:08

Saturday, Jan 03, 2009 at 22:08
Willem,
Back a few years when working in the bush the Dozers and Excavators had reversible fan blades to stop the Radiators filling with twigs and dust.Cant see why it would not work for your situation if only dodging along at a slow speed.Problem would be finding a reversible fan i suppose.
Regards Duke
AnswerID: 342495

Follow Up By: Willem - Saturday, Jan 03, 2009 at 22:45

Saturday, Jan 03, 2009 at 22:45
Thanks Duke

Yes I have seen that too on bush earth moving equipment

Would be too much work however to change fan blades out there

An alternative is to buy 900 x16 tyres to raise the chassis higher and the radiator away from the grass. Still some of the spinifex is quite larger in places.

I am going to make a bash plate that will fit back from the bullbar to the chassis rail( as shown in this thread) and this should stop a fair amount opf grass being sucked into the radiator cores.


Cheers
0
FollowupID: 610181

Reply By: Richard Kovac - Saturday, Jan 03, 2009 at 23:20

Saturday, Jan 03, 2009 at 23:20
4 bolts

look under the bonnet.. :-)
AnswerID: 342500

Sponsored Links