Grand Vitara Drawer System
Submitted: Thursday, Apr 09, 2009 at 14:46
ThreadID:
67717
Views:
6954
Replies:
3
FollowUps:
0
This Thread has been Archived
mas
We have a 3 dooor Grand Vitara looking to put draw system in rear what would be the best way to do this?
Reply By: Willem - Thursday, Apr 09, 2009 at 15:56
Thursday, Apr 09, 2009 at 15:56
Go to a Drawer System manufacturer to put one in for you, then pay them the money. Google them!
AnswerID:
358982
Reply By: Member - Graham H (QLD) - Thursday, Apr 09, 2009 at 17:42
Thursday, Apr 09, 2009 at 17:42
Not a lot of help but through the back door would seem to be logical....
Its all in how you ask the question
LOL
AnswerID:
358997
Reply By: Member - John F (NSW) - Saturday, Apr 11, 2009 at 18:24
Saturday, Apr 11, 2009 at 18:24
If you haven't been put off by the rapier-like wit of the above replies, and don't want to spend $1000, you could do what we did. Get a sheet or two of CD structural ply, 15 or 16 mm from memory, and make a box that fits pretty tight. Make two or three boxes that sit in there; these can pull out and form your kitchen. We put drop down legs on one.Image Could Not Be Found
I guess we can get away without fixing in the back of the hilux, in the Vitara you would need to make a couple of fixings for a safe and proper job.
We leave it in 99% of the time, but can just slide it out if the original space is needed. We are not yet (quite) nomads, so it's adequate for our occasional use.
We planned it out first, then got the plywood supplier to do most of the cuts for only a nominal fee.
Regards,
John.
AnswerID:
359218