Hilux Radio Wiring Diagram

Submitted: Tuesday, May 12, 2009 at 17:20
ThreadID: 68756 Views:41789 Replies:4 FollowUps:6
This Thread has been Archived
Hello all

Have a AM/FM radio out of 97 Hilux wanting to use for a new project has 8 wires from gen toyota plug has anyone got any info
please have done a google but only come up with radio/tape and cd players wire colours are

light green
blue
pink
purple
brown
grey
blue
green

Regards

Oldpop
Back Expand Un-Read 0 Moderator

Reply By: Member - Graham H (QLD) - Tuesday, May 12, 2009 at 17:41

Tuesday, May 12, 2009 at 17:41
What make is it toyotas used to be Fujitsu Ten radios perhaps look for a name and email the maker .

Thats what I did with one I got out of a Commodore.






AnswerID: 364500

Follow Up By: oldpop - Tuesday, May 12, 2009 at 17:55

Tuesday, May 12, 2009 at 17:55
Thanks for that will give them a try

Oldpop
0
FollowupID: 632169

Reply By: Lex M (Brisbane) - Tuesday, May 12, 2009 at 17:50

Tuesday, May 12, 2009 at 17:50
Does this help?
Image Could Not Be Found
AnswerID: 364502

Follow Up By: oldpop - Tuesday, May 12, 2009 at 17:58

Tuesday, May 12, 2009 at 17:58
Lex M

the ten pin plug looks the same but wire colours are a bit different

Regards

Oldpop
0
FollowupID: 632170

Follow Up By: Lex M (Brisbane) - Tuesday, May 12, 2009 at 18:09

Tuesday, May 12, 2009 at 18:09
I have a radio out of a 96 which agrees with this diagram. Be aware the plug as drawn is the plug in the dash which plugs into a toyota radio.

Check with multimeter if you have any doubts. Pin E,F and G all connect to the case on mine.
0
FollowupID: 632175

Follow Up By: oldpop - Tuesday, May 12, 2009 at 18:22

Tuesday, May 12, 2009 at 18:22
All wires check out OK except pin G mine is brown not black
will check with multi meter and see what happens

Oldpop
0
FollowupID: 632177

Follow Up By: Member - Phil G (SA) - Tuesday, May 12, 2009 at 21:09

Tuesday, May 12, 2009 at 21:09
Brown is earth.
I fitted a radio to a 1997 80series radio last weekend so its still fresh in my mind. I followed the wiring from the Prado which was from this site.
0
FollowupID: 632211

Follow Up By: Member - Phil G (SA) - Tuesday, May 12, 2009 at 21:11

Tuesday, May 12, 2009 at 21:11
Whoops! Heres the rest to go with the above:

A1 = Front Right pos = light green
A2 = Front Left pos = Pink
A3 = Accessory pos = Green/Red trace
A4 = Pos from battery = red but I ran a separate lead direct from battery
A5 = Front Right neg = Blue
A6 = Front Left Neg = Violet
A7 = earth = brown, but I ran a separate earth to a 6x1mm bolt inside the dash.
A8 = Antenna = Black/yellow trace
A9 = Amp + = pink/blue trace = not usually required
A10 = ???? lights - not usually required

B1 = Right Rear pos = red
B2 = Left Rear pos = Black
B3 = Right rear neg = white
B4 = Left rear neg = yellow
0
FollowupID: 632212

Reply By: rags - Tuesday, May 12, 2009 at 21:37

Tuesday, May 12, 2009 at 21:37
HI you will find that there will be a harness available from this company
http://www.aerpro.com.au/list.php?cat_name=harnesses&cat_no=10
available from jb hi fi ,jaycar,supercheap ,etc
used them 3 times for 2 toyotas and a ford ,makes life easer
Russell
Site Link
AnswerID: 364578

Reply By: oldpop - Wednesday, May 13, 2009 at 07:49

Wednesday, May 13, 2009 at 07:49
Thanks guys

Got all sorted now

Regards

Oldpop
AnswerID: 364607

Sponsored Links