Fitting and immobiliser to an 80 series Cruiser

Submitted: Sunday, Jun 07, 2009 at 19:25

ThreadID: 69592 Views:3429 Replies:1 FollowUps:2

This Thread has been Archived

Drew - Karratha

Does onyone know offhand what the colour of the wires coming out from behind the ignition on an 80 series corresponds to? I am trying to fit an immobiliser and need to connect it to the starter circuit and the ignition circuit - the problem is the colour of the wires doesnt seem to match what is indicated in the Gregory's manual..... I have been mucking around with it all day and havent really got anywhere....

Any info would be hugely appreciated!!

Thanks

Drew

Back Expand Un-Read 0 Moderator Share

Reply By: Member - Graham H (NSW) - Sunday, Jun 07, 2009 at 19:42

Sunday, Jun 07, 2009 at 19:42

use a test light the starter wire only has power on crank should be Black with White trace & the ignition has power to it when engine is running should be Blue with Black trace.This info from Ellery Manual for petrol 80 series

AnswerID: 368858

Follow Up By: Drew - Karratha - Sunday, Jun 07, 2009 at 21:11

Sunday, Jun 07, 2009 at 21:11

Thanks HEAPS!! I saw on the internet about 10 mins ago that the starter was Black with White. I will have a look tomorrow for a Blue with Black. The Black with White was in the Gregory's manual, (but hard to understand - for me..)but not the Bule with Black (or any other colour for that matter.....).
Drew

FollowupID: 636373