3 inch exhaust
Submitted: Wednesday, Jun 24, 2009 at 23:04
ThreadID:
70127
Views:
2621
Replies:
5
FollowUps:
2
This Thread has been Archived
Member - Longtooth (SA)
Anybody have any recommendations on a company manufacturing/fitting a 3" exhaust from the turbo back on a 4.2 L Patrol in
Adelaide?
Reply By: pt_nomad - Thursday, Jun 25, 2009 at 05:13
Thursday, Jun 25, 2009 at 05:13
LongTooth,
Beaudesert make exhausts and freight them out. They seem to be
well made.
I ended up fitting
mine my self - it is that easy, your local exhaust
shop could also fit them. My exhaust is 3" from the turbo to the rear.
Paul.
http://www.beauexhausts.com.au/
AnswerID:
371734
Follow Up By: MrBitchi (QLD) - Thursday, Jun 25, 2009 at 07:46
Thursday, Jun 25, 2009 at 07:46
If you get one from there make sure you get a stainless muffler.
Mine (aluminised steel) only lasted 18 months :-((
FollowupID:
639028
Reply By: Member. Rob M (QLD) - Thursday, Jun 25, 2009 at 08:18
Thursday, Jun 25, 2009 at 08:18
Longtooth,
I will also recommend
Beaudesert Exhausts mandrel bent system. They freight them all over Australia and overseas. Performance exhausts for cars and race boats seem be be their main business.
Rob M
AnswerID:
371743
Reply By: Member - Lance S (VIC) - Thursday, Jun 25, 2009 at 08:56
Thursday, Jun 25, 2009 at 08:56
Longtooth, definitely
beaudesert, but
check out your local dealer as
well,
i contacted
beaudesert and they were going to charge me $1320 plus delivery and i got it fitted by a local 4wd
shop for the same price.
cheers,
Lance
AnswerID:
371749
Reply By: KennyBWilson - Thursday, Jun 25, 2009 at 16:56
Thursday, Jun 25, 2009 at 16:56
MTQ diesel at regency park sell them , i think they can dyno your car before and after the installation
Exhaust Technology at goodwood can also custom fit one
i got my 2 and half inch done at Holden
hill , i have forgotten his name now.
I was told nothing wrong with 2 and half inches
AnswerID:
371814
Follow Up By: KennyBWilson - Thursday, Jun 25, 2009 at 17:02
Thursday, Jun 25, 2009 at 17:02
Rampage exhaust's Jacobson ave Holden
Hill , he has done heaps of the Rangie's and Patrols that enter those challenges
mine was only $660 a few years ago
FollowupID:
639104
Reply By: Member - Longtooth (SA) - Sunday, Jun 28, 2009 at 21:34
Sunday, Jun 28, 2009 at 21:34
Thanks all for the replies. What I required was a local (
Adelaide) manufacturer due to the diesel/gas fitted to the vehicle. Not game to buy one from interstate for self fitting due to the possibility of it being unsuitable with this tank fitted.
AnswerID:
372252