scangauge
Submitted: Tuesday, Jan 05, 2010 at 20:11
ThreadID:
74920
Views:
5467
Replies:
3
FollowUps:
7
This Thread has been Archived
bill
hello ,and happy new year to all, recently installed a scangauge in new patrol, have all standard gauge plus two on xgauge , turbo boost and current lt/hk current tank, i still have 20 or so additional gauge positions but have no idea how to program in any more gauges and what is available from the current port,,, can you for example, read oil pressure from the ecu. if so how do you code it? an excellant unit .. any info apprecieted bill
Reply By: Member - Alan H (QLD) - Tuesday, Jan 05, 2010 at 20:22
Tuesday, Jan 05, 2010 at 20:22
Depends on the vehicle and what codes are available.
I use consumption, turbo boost, water temp, inlet air temp. as my standard group.
I would like to have auto oil temp but can't find the required codes for my vehicle.
I trust water temp is an indicator but would like to have the correct sode.
Alan
AnswerID:
397804
Follow Up By: Gone Bush (WA) - Tuesday, Jan 05, 2010 at 20:46
Tuesday, Jan 05, 2010 at 20:46
Alan, I have changed turbo boost to kilowatts. It's interesting seeing how few kilowatts are developed to get the 200 rolling along.
cheers
FollowupID:
666654
Follow Up By: Member - Alan H (QLD) - Wednesday, Jan 06, 2010 at 10:55
Wednesday, Jan 06, 2010 at 10:55
Gone Bush
How do you get kilowatts?????
Thanks
Alan
FollowupID:
666724
Reply By: Member - Captain (WA) - Tuesday, Jan 05, 2010 at 22:30
Tuesday, Jan 05, 2010 at 22:30
Hi Bill,
I recently found this for auto transmission temp, but have not had a chance to try it out yet.
X gauge
monitor transmission temp.
TXD – 686AF101B4
RXF – 044105B40000
RXD – 2808
MTH – 00090005FFD8
Let us know how you go!!!
Cheers
Captain
AnswerID:
397837
Follow Up By: rambada1 - Wednesday, Jan 06, 2010 at 08:17
Wednesday, Jan 06, 2010 at 08:17
Which vehicle does that apply to please Captain? I'm after the trans temp code for my Nissan Navara D40 2.5L.
Scangauge is an excellent adjunct to the normal vehicles.
FollowupID:
666695
Follow Up By: Member - Alan H (QLD) - Wednesday, Jan 06, 2010 at 10:45
Wednesday, Jan 06, 2010 at 10:45
Captain
I entered the codes into my scanguage but it doesn't work on my 200series GXL diesel
Alan
FollowupID:
666720
Follow Up By: Member - Captain (WA) - Thursday, Jan 07, 2010 at 11:13
Thursday, Jan 07, 2010 at 11:13
Bugger, I got these codes off the internet, but it didn't specify which model - or I have simply forgotten which model I got if from. Was going to try it myself when I had a chance, but looks like I won't worry now.
Cheers
Captain
FollowupID:
666887
Reply By: Bob of KAOS - Wednesday, Jan 06, 2010 at 08:22
Wednesday, Jan 06, 2010 at 08:22
I bought
mine from Woodgers Garage.
Outside the warranty period it decided to die (unintelligible characters across screen).
Woodgers were excellent and replaced the unit for me at no cost.
AnswerID:
397860
Follow Up By: Bob of KAOS - Wednesday, Jan 06, 2010 at 08:24
Wednesday, Jan 06, 2010 at 08:24
Correction : Wooders. Dave Wooder is the man.
FollowupID:
666698