cable and wire gauge guide
Submitted: Tuesday, Jun 15, 2010 at 22:49
ThreadID:
79390
Views:
6053
Replies:
4
FollowUps:
4
This Thread has been Archived
Member - Murray R (VIC)
Image Could Not Be FoundThis might assist people when they want to wire aux batts, rear power outlets,
driving lights etcImage Could Not Be Found
Reply By: Member - Toyocrusa (NSW) - Wednesday, Jun 16, 2010 at 06:41
Wednesday, Jun 16, 2010 at 06:41
Hi Murray. Thanks for that. I wonder if you could add a link direct to the table or rescan it at a higher resolution. It is coming out a touch blurred to read easily. Regards,Bob.
AnswerID:
421009
Follow Up By: Member - Murray R (VIC) - Wednesday, Jun 16, 2010 at 19:19
Wednesday, Jun 16, 2010 at 19:19
Bob
I've rescaned the info and is now better to read.
murray
FollowupID:
691356
Reply By: Member - John and Val - Wednesday, Jun 16, 2010 at 08:00
Wednesday, Jun 16, 2010 at 08:00
Good find Murray, as said above though, would you please post the links - the images are a bit hard to read.
You might be interested in these links too. They relate to AWG sizes, which are the same as B&S:
Wire gauges, sizing in mm and square mm, resistance per metre Maximum recommended current as a function of wire size and length
Cheers
John
| J and V
"Not everything that can be counted counts, and not everything that counts can be counted."
- Albert Einstein
Lifetime Member
My Profile My Blog Send Message |
AnswerID:
421016
Follow Up By: Member - Murray R (VIC) - Wednesday, Jun 16, 2010 at 19:25
Wednesday, Jun 16, 2010 at 19:25
John
It was in a brochure at work and as said I thought that it might help members.
Cheers
Murray
FollowupID:
691359
Reply By: Member - mazcan - Wednesday, Jun 16, 2010 at 12:24
Wednesday, Jun 16, 2010 at 12:24
hi murray r
good idea and thoughtful
but having trouble reading it
can you expand it's resolution and repost
cheers and thanks
AnswerID:
421042
Follow Up By: Member - Murray R (VIC) - Wednesday, Jun 16, 2010 at 19:21
Wednesday, Jun 16, 2010 at 19:21
Mazcan
Its been rescaned.
Murray
FollowupID:
691358
Follow Up By: Member - mazcan - Wednesday, Jun 16, 2010 at 21:25
Wednesday, Jun 16, 2010 at 21:25
hi murray r
many thanks it's now a1 ok
cheers
FollowupID:
691384
Reply By: Member - Murray R (VIC) - Wednesday, Jun 16, 2010 at 21:09
Wednesday, Jun 16, 2010 at 21:09
As requested I have rescaned and hope this is betterImage Could Not Be FoundImage Could Not Be Found
AnswerID:
421112