Power chips and 3inch exhursts

Submitted: Monday, Dec 06, 2010 at 15:29

ThreadID: 82890 Views:3233 Replies:4 FollowUps:2

This Thread has been Archived

new boy

Will be in Melbourne over Xmas and late January am interested in doing the upgrade to the Patrol can anyone point me toward someone to contact re doing the job
Thanks in advance

Back Expand Un-Read 0 Moderator Share

Reply By: Mick O - Monday, Dec 06, 2010 at 17:38

Monday, Dec 06, 2010 at 17:38

Have you made any decision as to what type of chip and exhaust? You might want to let your fingers do the walking a bit first. A search of the previous forum posts would be a good start. Also 4x4 Action magazine had a chip comparison in issue No. 152 a few months ago. Very informative.

Most 4x4 retailers will fit chips and exhausts so you really need to be armed with some desicions around which chip etc.

Try this link;Diesel Chip.

Cheers Mick

''We knew from the experience of well-known travelers that the
trip would doubtless be attended with much hardship.''
Richard Maurice - 1903

Lifetime Member
My Profile My Blog My Position Send Message

AnswerID: 438025

Reply By: Member - Graham H (QLD) - Monday, Dec 06, 2010 at 17:42

Monday, Dec 06, 2010 at 17:42

If its a 3.0L I think most recommend a 2.5 in exhaust.

I upgraded mine the easy way. I bought a TD Cruiser LOL

AnswerID: 438026

Reply By: Michael A (VIC) - Monday, Dec 06, 2010 at 20:42

Monday, Dec 06, 2010 at 20:42

Have a chat to the boys at Outback 4WD, Bayswater North

AnswerID: 438057

Reply By: GUJim - Monday, Dec 06, 2010 at 22:57

Monday, Dec 06, 2010 at 22:57

I have no hesitation on recommending Diesel Tech in Lilydale if that's not too far out of the way for you.
Andrew there did a very thorough job on my 2004 3L GU, fitting a DP Chip, 2 3/4"exhaust, and EGT guage. Coincidently the EGR stopped working about the same time.
Testing on his Dyno proved the gains that were subtle under normal driving but obvious when towing.
Prices were in accordance with the work done.

AnswerID: 438074