Mounting a winch in a Alloy bullbar.

This post has been read by the moderation team and has been moderated due to a breach of The Spamming Rule .

Forum Moderation Team

Steven i would take the bull bar to a metal fabricator and get there opinion. they are trained in that sort of thing.

G/day,Yes you do need a steel cradle,it should be bolted to the chassis, the bar maker may have a ready made cradle, I have an 8,000lb.,winch on an alloy bar and it pulled the cruiser and c/van out of a sandy river bed easily with a pulley in the line, had to winch about 40 meters Regards Keith C

Check Robin Miller's post....it will show you how you might achieve this.

Okay thanks for the help I will see if they make a cradle for my bar if not I will go see a metal fabricator.

Gday
Check post 83101 and see what Robin Miller has used for his Nissan.
Murray