Paj Gearbox help please
Submitted: Sunday, Nov 23, 2003 at 01:29
ThreadID:
8690
Views:
1167
Replies:
7
FollowUps:
1
This Thread has been Archived
Noah's Dad
Hello, guys can anyone please help me, just got a 2000 paj, manual.
I love it and my wife love's it the baby loves it, so why am I worried?
The gearbox when cold is very clunkie i get some crunch's in 1st and 2nd, after it warms up it gets better but still it just feels alittle bit like i just catch the teeth on the gears.
I feel the clutch could have abit more feel, but Iv been to guys at Mitsi
and they say it's fine, just to double
check i took it to another and he said it was ok that's "NORMAL".
I just want to know if this box has a problem, and they just dont want to sort it.
I don't think this is down to driver error, so any help advise would a great help.
Many Thanks Noah's Dad
By the way it has full servise history, and has only done 59K
Reply By: Phil G - Sunday, Nov 23, 2003 at 08:13
Sunday, Nov 23, 2003 at 08:13
Most likely, it has gearbox oil thats a bit too thick, cheap or the wrong grade.
On Toyotas I find the Valvoline Duragear 75/85 semi-synthetic to stop the cold shift problem. The same grade is recommended for your Pajero.
AnswerID:
38155
Follow Up By: Noah's Dad - Tuesday, Nov 25, 2003 at 17:32
Tuesday, Nov 25, 2003 at 17:32
thank you everyone for your help i ll let you know how it goes.
cheers Noahs Dad
FollowupID:
27903
Reply By: Member - Eric- Sunday, Nov 23, 2003 at 08:20
Sunday, Nov 23, 2003 at 08:20
No griding noise is normal lol . As abov look into changing gear oil
Venus Bay
AnswerID:
38156
Reply By: Member - Bob - Sunday, Nov 23, 2003 at 10:30
Sunday, Nov 23, 2003 at 10:30
ND, is it gradually getting worse? Sounds like the synchro on lower gears is wearing _I don't know the first thing about gear boxes :-) but have replaced a few as a youth (long time ago). My Pajeros were a bit snicky too I seem to remember. Try changing the fluid as suggested, but maybe just slow down your changes to avoid the snick. Otherwise get the synchro rings adjusted/replaced (remember - I know nothing) when it becomes intolerable.Bob
AnswerID:
38162
Reply By: Russell [Pajero] - Sunday, Nov 23, 2003 at 16:55
Sunday, Nov 23, 2003 at 16:55
Try some slick 50 in the gearbox it worked for me.
RTA
Russell
AnswerID:
38187
Reply By: brett - Sunday, Nov 23, 2003 at 20:43
Sunday, Nov 23, 2003 at 20:43
My 2003 model is like that in third gear, has done it from the day I drove it
home. But doesn't always do it, sometimes it can be real smoth but every now and then I get a clunk going from 2nd to 3rd, as expected dealer says no problem.If I slow the change down a bit it never does it.
AnswerID:
38216
Reply By: Noah's Dad - Tuesday, Nov 25, 2003 at 17:21
Tuesday, Nov 25, 2003 at 17:21
thank you all very much for your help, i'm looking in to it, Noahs dad
AnswerID:
38405
Reply By: Noah's Dad - Tuesday, Nov 25, 2003 at 17:22
Tuesday, Nov 25, 2003 at 17:22
thank you all very much for your help, i'm looking in to it, Noahs dad
AnswerID:
38406