suspension set up for 94 4Runner
Submitted: Monday, May 06, 2002 at 00:00
ThreadID:
1086
Views:
2093
Replies:
2
FollowUps:
0
This Thread has been Archived
Scott
Can anyone suggest the best
suspension setup for IFS 4runner?
A lot of people are using Rancho RS 9000??
Also has anyone got any feed back on Sourthern cross suspesion ( i'm not sure on the exact name ) they are based around the Oaks or Oakdale area south west of
sydney i think?
Reply By: ray - Tuesday, May 07, 2002 at 00:00
Tuesday, May 07, 2002 at 00:00
HI,SCOTT I HAVE A 4RUNNER AND HAVE TRYED 6 DIFFERENT SPRING/SHOCKIE SET UPS OVER THE LAST YEAR. I NOW HAVE KINGS SPRINGS PART #KTPR-68 IN THE REAR, RANCHO SHOCKS PART#RS5159 ON THE FRONT AND RANCHO SHOCKS PART#5208 ON THE REAR.LEAVE ORIGINAL TORSION BARS ON, MAYBEE WIND UP TO SET FRONT
SUSPENSION HALF WAY BETWEEN BUMP STOPS,HIGHER DOES NOT HELP ,YOU LOOSE WHEEL TRAVEL.THIS SET UP LIFTS THE CAR ABOUT 2-3 INCHES AND WORKS REALY GOOD OFF ROAD WITH LOTS OF WHEEL TRAVEL AT THE BACK.
AnswerID:
3388
Reply By: james - Wednesday, Jun 26, 2002 at 00:00
Wednesday, Jun 26, 2002 at 00:00
i had a 4runner also, ran 3" body lift in it with oem springs and rancho shocks, allowed me to run 33" tyres and gave good offroading, have a look at the
pic @ www.ausjeepoffroad.com in the gallery in friends section, the silver 4runner.
AnswerID:
4429