Fitter & turner needed
Submitted: Monday, Feb 21, 2005 at 19:02
ThreadID:
20643
Views:
2000
Replies:
12
FollowUps:
13
This Thread has been Archived
Member Eric
I am in need of a fitter and turner in
Melbourne , so i thought i would try here first. Basicly i need him to turn up some alloy body blocks for the cruiser .
Thanks in advance guys
Reply By: Diamond (Vic) - Monday, Feb 21, 2005 at 19:23
Monday, Feb 21, 2005 at 19:23
what fully sik lift are you up to now?
AnswerID:
99358
Follow Up By: Member Eric - Monday, Feb 21, 2005 at 19:32
Monday, Feb 21, 2005 at 19:32
All to be revieled in time my friend lol see ya in MS
FollowupID:
357681
Follow Up By: Member Eric - Monday, Feb 21, 2005 at 19:33
Monday, Feb 21, 2005 at 19:33
PS Adam ( Crazy ), if you read this post , keep your trap shut lol
FollowupID:
357683
Follow Up By: Diamond (Vic) - Monday, Feb 21, 2005 at 20:09
Monday, Feb 21, 2005 at 20:09
no you wont
FollowupID:
357689
Follow Up By: Member - Crazie (VIC) - Monday, Feb 21, 2005 at 22:44
Monday, Feb 21, 2005 at 22:44
Wish I knew hahaha
oh that... ok i am with you now....
FollowupID:
357715
Reply By: Glenn (VIC) - Monday, Feb 21, 2005 at 19:29
Monday, Feb 21, 2005 at 19:29
Have you spoken to Big Al? Isn't he a fitter and turner? He is also a qualified welder as
well. Jack of all trades you could say.
Cheers
AnswerID:
99362
Follow Up By: Member Eric - Monday, Feb 21, 2005 at 19:31
Monday, Feb 21, 2005 at 19:31
I think Al has enough of his plate dont you ?? lol shhhhh
FollowupID:
357680
Follow Up By: Glenn (VIC) - Monday, Feb 21, 2005 at 19:33
Monday, Feb 21, 2005 at 19:33
I think you may be correct...poor fella
FollowupID:
357682
Follow Up By: Truckster (Vic) - Tuesday, Feb 22, 2005 at 10:47
Tuesday, Feb 22, 2005 at 10:47
Thats going to end in disaster!!!
FollowupID:
357774
Reply By: Member - Andrew R (VIC) - Monday, Feb 21, 2005 at 19:33
Monday, Feb 21, 2005 at 19:33
I'm pretty handy with a hammer and chisel!!
AnswerID:
99363
Reply By: Member - bushfix - Monday, Feb 21, 2005 at 19:37
Monday, Feb 21, 2005 at 19:37
aah sorry mate, can't help you but your topic as read, brought a smile.
That's a term we used to use for the (incompetent)
camp cook: they could FIT it in a pot and TURN it into shiiit, hence fitter and turner.
apologies to all those fair dinkum fitters!
AnswerID:
99364
Reply By: Diamond (Vic) - Monday, Feb 21, 2005 at 20:45
Monday, Feb 21, 2005 at 20:45
once you fit her what way do you wana turn her
AnswerID:
99374
Follow Up By: Member Eric - Monday, Feb 21, 2005 at 20:54
Monday, Feb 21, 2005 at 20:54
I am greek , so you guess lol
FollowupID:
357693
Follow Up By: Truckster (Vic) - Tuesday, Feb 22, 2005 at 10:48
Tuesday, Feb 22, 2005 at 10:48
Mayday..
FollowupID:
357775
Reply By: awill4x4 - Monday, Feb 21, 2005 at 20:48
Monday, Feb 21, 2005 at 20:48
Eric, is there anything special about the shape of the alloy blocks? Are they just a disc with a hole drilled in the centre?
We've got a lathe at work if it's just a simple turning job, I'm not a fitter but a boilermaker/specialist tig welder if that helps.
Our factory is in Carrum Downs if that helps.
Regards Andrew.
AnswerID:
99375
Follow Up By: Member Eric - Monday, Feb 21, 2005 at 20:55
Monday, Feb 21, 2005 at 20:55
Thanks Andrew . If I dont get anyone closer ,I might just take you up on that
Cheers
FollowupID:
357694
Follow Up By: Truckster (Vic) - Tuesday, Feb 22, 2005 at 10:49
Tuesday, Feb 22, 2005 at 10:49
Get Andrew to make your intercooler while your at it
FollowupID:
357776
Follow Up By: Member Eric - Tuesday, Feb 22, 2005 at 17:08
Tuesday, Feb 22, 2005 at 17:08
I need a intercooler Andrew , do you make them /? if yes call me on 0418364781
cheers
FollowupID:
357832
Follow Up By: Truckster (Vic) - Tuesday, Feb 22, 2005 at 23:14
Tuesday, Feb 22, 2005 at 23:14
I had photos of some of his work here, I'll get some more.
His last few IC's for the ricers and his own alloy Radiator are works of art... Very good.
Call me I got Andrews # if need be.
FollowupID:
357898
Reply By: Member - Toonfish - Monday, Feb 21, 2005 at 22:16
Monday, Feb 21, 2005 at 22:16
I used to be a fitter and turner
fit some fit food into a pot and turn it into S#&t .
dont miss the defence much lol
why dont you jus get so,me from the outerlimits for sale section they can include bolts too!
cya soon
AnswerID:
99396
Reply By: db courier - Tuesday, Feb 22, 2005 at 09:18
Tuesday, Feb 22, 2005 at 09:18
Hi eric, i am a fitter and turner who also runs an engineering workshop from home with all the gear needed to do your job. i am, however, in
sydney but if u like u can fax me a sketch, ill give you a figure and can courier/post them to you as soon as there done. Be glad to help if i can.
cheers
db.
AnswerID:
99459
Reply By: fourstall2000 - Tuesday, Feb 22, 2005 at 10:40
Tuesday, Feb 22, 2005 at 10:40
Retired Fitter and Turner with lathe in Healesville if thats any help.
be glad to turn up blocks if material is provided with sketch.
E mail is lynive@bigpond.com.au
Regards
AnswerID:
99478
Reply By: Truckster (Vic) - Tuesday, Feb 22, 2005 at 10:48
Tuesday, Feb 22, 2005 at 10:48
I bought mine from caparal ally in dande, they sell different diameter alloy and will cut to length too.
AnswerID:
99480
Reply By: Happy GU Owner - Tuesday, Feb 22, 2005 at 12:35
Tuesday, Feb 22, 2005 at 12:35
Eric,
My fathers toolmaking/fitting & turning business and workshop is in Bayswater if this is convenient for you
Mic
AnswerID:
99484
Reply By: Member Eric - Tuesday, Feb 22, 2005 at 17:09
Tuesday, Feb 22, 2005 at 17:09
Thanks for all the replies guys , who said $50 was to much for this sight lol .
Alan is organising it for me
cheers all
AnswerID:
99506