oil filter sandwich plate

Submitted: Monday, Apr 25, 2005 at 22:49
ThreadID: 22368 Views:2450 Replies:2 FollowUps:0
This Thread has been Archived
I am trying to locate an oil filter sandwich plate to fit between the oil filter and the engine block on my 1HZ diesel to give me access to the oil system as I want to feed the turbo and a bypass filter from this point. Or is there another point that I can tap into. I do not want to use the oil pressure sender outlet as I get low oil pressure readings due to the amount of oil flowing to the filter and the turbo.
Back Expand Un-Read 0 Moderator

Reply By: Richard Kovac - Monday, Apr 25, 2005 at 22:52

Monday, Apr 25, 2005 at 22:52
Coventry's Motors in WA if not in other states WIX put them out
Richard
AnswerID: 108153

Reply By: Member - DOZER- Tuesday, Apr 26, 2005 at 08:13

Tuesday, Apr 26, 2005 at 08:13
Muzza
If you have a oem motor manual, have a look at the way the oil system is set up...There is a oil cooler in the engine block that oil pressure flows through that has some relief valves on it.... this might be the place to tap the bypass into...your motor needs all that oil pressure. Keep the turbo feed on the sender line as this is the best place to feed it from.
There is a place in Perth than manufactures these toilet roll filters....they would be able to give you a heads up
b4 you bag me out, walk a mile in my shoes, then your a mile away and have my shoes :)

Member
My Profile  My Position  Send Message
Classifieds: Bt50/Ranger Speedy grande2 18x8 alloys (x4), Landcruiser 200 series/100 series 4 alloy rims with tyres and nuts GC

AnswerID: 108186

Sponsored Links

Popular Products (14)