Anyone know if/where I can get 17" Steel rims?
Submitted: Wednesday, May 17, 2006 at 15:14
ThreadID:
33984
Views:
1725
Replies:
4
FollowUps:
5
This Thread has been Archived
Member - Coyote (SA)
Hi all. I'm looking for 17" Steel rims. Anyone know where i can get em from or if at all? Cheers
Reply By: Member - Paul P (Bris) - Wednesday, May 17, 2006 at 16:20
Wednesday, May 17, 2006 at 16:20
G'day
Perhaps drop ROH a an email and ask if they will make some for you? You can also fit 16" steels to the GUIV. The tyre placard is a Nissan part.
I fitted 16 inch steels to
mine plus the placard.
Regards
Paul
AnswerID:
173159
Follow Up By: Member - Coyote (SA) - Wednesday, May 17, 2006 at 16:34
Wednesday, May 17, 2006 at 16:34
Fair point re 16" on GUIV, but my dilema is I picked up a set of 6 Cooper STT's 17" (Thanks Voxson) and my plan is to change them onto my GU prior to a big trip and then go back to the standard issue ones for 'around town' but I figured If I could find a set of second hand 17" rims I'd leave em fitted, but no biggy if not, just have to pay the $60 or so to get em swapped over each time.. Cheers
FollowupID:
428988
Follow Up By: Member - Paul P (Bris) - Wednesday, May 17, 2006 at 19:30
Wednesday, May 17, 2006 at 19:30
ROH make 17 inch alloys for the GUIV. Lots of $$$ though. Perhaps a wanted add in the trader section.
Regards
Paul
FollowupID:
429035
Reply By: Voxson (Adelaide) - Wednesday, May 17, 2006 at 18:35
Wednesday, May 17, 2006 at 18:35
Site Link
Now dont say i dont do anything for you...
If you buy these then you will have 10 rims....
2 lots of 5.. Problem solved...
AnswerID:
173181
Follow Up By: Member - Coyote (SA) - Thursday, May 18, 2006 at 18:44
Thursday, May 18, 2006 at 18:44
now thats tempting... cheaper than buying new steel rims...
FollowupID:
429331
Reply By: Crackles - Wednesday, May 17, 2006 at 19:27
Wednesday, May 17, 2006 at 19:27
If they are made ATS in Geelong will be able to source them.
Cheers Craig...........
AnswerID:
173191
Follow Up By: Member - Coyote (SA) - Thursday, May 18, 2006 at 13:50
Thursday, May 18, 2006 at 13:50
Thanks Crackles.. you were right. they have several types/colors etc available from
Sydney.. Now I just need to find the $$ of course..
FollowupID:
429244
Follow Up By: Truckster (Vic) - Thursday, May 18, 2006 at 16:32
Thursday, May 18, 2006 at 16:32
Darren was on this board.
FollowupID:
429286
Reply By: Fiona (VIC) - Wednesday, May 17, 2006 at 22:58
Wednesday, May 17, 2006 at 22:58
I have got 17" steel rims.
AnswerID:
173255