285x75 MTR's is this a good price
Submitted: Tuesday, May 30, 2006 at 23:34
ThreadID:
34445
Views:
2145
Replies:
8
FollowUps:
11
This Thread has been Archived
Truckster (Vic)
called a place in Melb today and was quoted $260 for MTR's in 285x75
is that what others are paying? Im used to good old 33x12.5 measurements..($240 for them)
Reply By: drifta - Tuesday, May 30, 2006 at 23:40
Tuesday, May 30, 2006 at 23:40
Truckster
I paid $269 for
mine about 8 months ago best price I could find in
Perth.
Unless things have changed it sounds good.
Drifta
PS Found them to be a great tyre so far.
AnswerID:
175777
Reply By: Rick (S.A.) - Wednesday, May 31, 2006 at 00:04
Wednesday, May 31, 2006 at 00:04
' ken oath.
I paid $ 255 in december 2005, and that was red hot for 265/75/16's.
Love'em.
Quite suprised how
well they went in loose sand.
AnswerID:
175782
Reply By: Richard W (NSW) - Wednesday, May 31, 2006 at 05:22
Wednesday, May 31, 2006 at 05:22
Got quoted $285 for 285X75X16 about 2 months ago in
Sydney after shopping around so seems pretty good.
AnswerID:
175793
Reply By: Truckster (Vic) - Wednesday, May 31, 2006 at 08:08
Wednesday, May 31, 2006 at 08:08
sweet people... gettin fitted this arvo... :)
AnswerID:
175816
Follow Up By: Scoey (QLD) - Wednesday, May 31, 2006 at 08:36
Wednesday, May 31, 2006 at 08:36
You'll love 'em! $280 a corner for 285/75-16's for me and that was with a heap of haggling!
FollowupID:
431881
Follow Up By: Member - Crazie (VIC) - Wednesday, May 31, 2006 at 10:31
Wednesday, May 31, 2006 at 10:31
mtz???
FollowupID:
431900
Follow Up By: Scoey (QLD) - Wednesday, May 31, 2006 at 11:01
Wednesday, May 31, 2006 at 11:01
G'day Crazie,
Are you asking me if the price I posted was for MT/R's?? ;-) If you are then yep, the best price I could get for 285/75-16 MT/R's was $280 each for 5 tires. Or does mtz mean something else haha?
Cheers
Scoey!
FollowupID:
431906
Follow Up By: Member - Crazie (VIC) - Wednesday, May 31, 2006 at 11:07
Wednesday, May 31, 2006 at 11:07
Hi Scoey
No mate sorry, last I heard mr trucky was going with MTZ Mickey thompson, just wondering why he has gone with the MTR's hahaha sorry for the confussion.
Ads
FollowupID:
431908
Follow Up By: Truckster (Vic) - Wednesday, May 31, 2006 at 11:22
Wednesday, May 31, 2006 at 11:22
If I could get MTZ's for same price I'd do it, but sadly they were $lots each more..
Thats enough for new dual battery system and tray :(
FollowupID:
431914
Follow Up By: Scoey (QLD) - Wednesday, May 31, 2006 at 11:39
Wednesday, May 31, 2006 at 11:39
hehe, thought you must've been askin something else but that's the only thing I could think of! Cheers for
clearing that up.... doesn't take a whole lot to confuse me! ;-)
Cheers
Scoey!
FollowupID:
431918
Follow Up By: Sarg - Wednesday, May 31, 2006 at 21:35
Wednesday, May 31, 2006 at 21:35
BFG's are cheaper & better .
FollowupID:
432063
Follow Up By: Truckster (Vic) - Wednesday, May 31, 2006 at 21:54
Wednesday, May 31, 2006 at 21:54
No they aint and no they aint.
FollowupID:
432071
Reply By: V8Diesel - Wednesday, May 31, 2006 at 08:27
Wednesday, May 31, 2006 at 08:27
Was quoted over $400ea for 305's MTR's in
Fremantle. Buy 'em. Buy 'em quick.
AnswerID:
175825
Reply By: Peter McG (Member, Melbourne) - Wednesday, May 31, 2006 at 09:46
Wednesday, May 31, 2006 at 09:46
Truckster,
Where are you getting this price? I'm looking too. Email me direct please. I'd also be interested to know form you if any Nissan club members with 2002/2003 GUs have had problems with wheel studs breaking. FTG Nissan tell me
mine did not fail due to over tightening. The investigation continues.
Peter
AnswerID:
175842
Follow Up By: Truckster (Vic) - Wednesday, May 31, 2006 at 11:22
Wednesday, May 31, 2006 at 11:22
yea there have been talks on wheel studs on other forums
what email addy u on?
FollowupID:
431915
Follow Up By: Peter McG (Member, Melbourne) - Wednesday, May 31, 2006 at 11:32
Wednesday, May 31, 2006 at 11:32
Sorry, I thought email was visible.
mcguckian at acer dot edu dot au
Cheers
Peter
FollowupID:
431916
Follow Up By: Truckster (Vic) - Wednesday, May 31, 2006 at 19:44
Wednesday, May 31, 2006 at 19:44
John is the man at Beaurepairs in
richmond Vic.
FollowupID:
432033
Reply By: andymitch - Wednesday, May 31, 2006 at 15:13
Wednesday, May 31, 2006 at 15:13
I'm looking forward to buying my next set of 285's . Last lot cost me $450 each. Mind you that was in N.Z. Even allowing the exchange rate thats expensive.
Andy
AnswerID:
175916
Reply By: Member - Nick (Kununurra) - Wednesday, May 31, 2006 at 19:39
Wednesday, May 31, 2006 at 19:39
$335 (285)per corner here and no where else to compare with.Like it or lump it.
AnswerID:
175977